Instruction manual

18
Installation
General instructions
• Position the drawer on a stable shelf.
• The supporting shelf must have a
rear opening of 20 mm.
• The unit in which the drawer is
installed must not have a back
panel.
Installing the appliance
1. Centre and line up the drawer in
the opening. Ensure that the frame is
perfectly flush with the furniture unit.
2. Open the drawer.
3. Secure the appliance to the piece of
furniture using screws.
4. Position the side covers.
Appliance dimensions (mm)
Follow the instructions provided
in the relative use and
installation booklet in order to
install the appliance that can
be combined with the drawer.
875
585