Instruction manual

Installation
42
Assembling the backguard
The backguard must always be positioned
and secured correctly on the appliance.
1. Loosen the 4 screws (A) on the back of
the cooktop (2 for each side) using a
screwdriver.
2. Place the backguard on the worktop.
3. Align the slots of the backguard (B) with
the screws (A).
4. Tighten the 4 screws previously
loosened.
5. Use the 3 supplied screws to fix from
above the backguard to the cooktop.
Fastening to the wall
1. Screw the wall fastening plate to the
rear of the appliance.
2. Adjust the height of the 4 feet.
The backguard provided is an
integral part of the product. It must
be fastened to the appliance prior
to installation.
The anti-tip devices must be
installed in order to prevent the
appliance tipping over.