Instruction manual

ManualsBrandsSmeg ManualsMajor AppliancesWine Cooler Dolce Stil Novo

Table of contents

1Instructions 16

1.1 General instructions 16

1.2 This user manual 16

1.3 Declaration of conformity 17

1.4 Declaration art. 10.10 Directive 2014/53/EU 17

1.5 How to read the user manual 17

2 SmegConnect 18

2.1 Control panel 18

2.2 Connectivity requirements 19

2.3 Installing the App 19

2.4 Registration of the product 19

2.5 Remote connection 22

2.6 Change of the Access Point access rights 22

2.7 Connection information 24

2.8 Deleting the registration 25

2.9 Software updates 25

2.10What to do if... 26

The manufacturer reserves the right to make any changes deemed necessary for the

improvement of its products without prior notice. The illustrations and descriptions contained

in this manual are therefore not binding and are merely indicative.

We advise you to read this manual carefully, which contains all the instructions for

maintaining the appliance’s aesthetic and functional qualities.

For further information on the product: www.smeg.com

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

Apple, App Store and iOS are trademarks of Apple Inc.

Google Play Store and Android are trademarks of Google Inc.

Wi-Fi is a trademark of Wi-Fi Alliance.

ENGLISH

Dear customer, we would like to thank you for your confidence in us.

By choosing one of our products, you have opted for solutions where research for

beauty meets innovative technical design to provide unique objects which become

pieces of furniture.

We hope you get the most out of your household appliance.

Kindest regards.

SMEG S.p.A.

Summary of content (12 pages)

PAGE 1
Table of contents 1 Instructions 16 General instructions This user manual Declaration of conformity Declaration art. 10.10 Directive 2014/53/EU How to read the user manual 16 16 17 17 17 2 SmegConnect 18 2.1 Control panel 2.2 Connectivity requirements 2.3 Installing the App 2.4 Registration of the product 2.5 Remote connection 2.6 Change of the Access Point access rights 2.7 Connection information 2.8 Deleting the registration 2.9 Software updates 2.10What to do if...
PAGE 2
Instructions 1 Instructions 1.1 General instructions • The use of the App requires the availability of a WLAN (Wi-Fi) network with dedicated Internet router, for the connection between appliance and mobile device. • In case of poor signal for the use of the appliance, envisage to install a Wi-Fi repeater nearby. • Outside the coverage range of the Wi-Fi network, the use of the App involves the availability of a data link for the mobile device.
PAGE 3
1.3 Declaration of conformity The manufacturer SMEG declares that the types of radio devices: CVI118RWS2 - CVI118LWS2 CVI118RWN2 - CVI118LWN2 CVI318RWX2 - CVI318LWX2 CVI618RWNR2 - CVI618LWNR2 CVI618RWNX2 - CVI618LWNX2 CVI638RWN2 - CVI638LWN2 CVI338RWX2 - CVI338LWX2 comply with the directive 2014/53/EU. • Technology: Wi-Fi IEEE 802.11 b/g/n. • Frequency: 2400-2497 MHz. • Maximum output power: +18.5 dBm. • The appliance operates in the ISM 2.4 GHz band.
PAGE 4
SmegConnect 2 SmegConnect The appliance is equipped with the SmegConnect technology so that the user can control its operation through an App on his smartphone tablet. For further information, refer to the supplied brochure and/or visit the site www.smeg.com 2.1 Control panel The functions of the control panel depending on the appliance connectivity will be described here below. Display The display shows the information of the appliance. ON/OFF key This key allows you to turn the appliance on or off.
PAGE 5
2.2 Connectivity requirements 2.4 Registration of the product • Smartphone or tablet running iOS version 10.x or later or Android version 5.1 or later. • Wi-Fi network (2.4 GHz band, WPA2 protected) active and available in the place where the appliance is installed. • Internet connection. • Name and password of the home Wi-Fi. The registration step is formed by alternated operations to be made in the App and 2.
PAGE 6
SmegConnect Creating an account 4. Press any key on the device to activate the control panel. 1. Launch the SmegConnect App. 2. Enter the information required in order to register. the fields marked with an asterisk “ ” are mandatory. 3. A confirmation e-mail is sent to the address that has been entered when the registration procedure has been completed. 5. Hold down the Connection key for a few seconds. The device enters the SmegConnect menu; the display shows .
PAGE 7
SmegConnect 8. Touch Next and wait. EN 5. Go back to the SmegConnect App and touch Next. 6. Press the Fan key on the appliance within one minute, to confirm your presence. The Connection starts flashing. key During this phase, the mobile device automatically reconnects to the Wi-Fi network or the initial data network. No action is required by the user. 9. Wait for the welcome screen to appear. 7. Enter the Access Point information: • Name of the home Wi-Fi network. • Wi-Fi password.
PAGE 8
SmegConnect 2.5 Remote connection 2.6 Change of the Access Point access rights The access right change procedure can be interrupted at any time by pressing the Connection key Once the appliance has been registered, it can be connected or disconnected from the Internet at any time. The remote connection is only available when the appliance has been registered. To connect the device: 1. Press any key to activate the control panel. 2. Press the Connection The Connection key. key starts flashing.
PAGE 9
6. Select Manual mode. 7. Go to the Wi-Fi settings on the mobile device and select the “smegconnect” network. 8. Enter the password “smeg0001” and wait for the connection to be established. 9. Go back to the SmegConnect App and touch Next. 11.Enter the Access Point information: • Name of the home Wi-Fi network (SSID) • Wi-Fi password (key). 12.Touch Next and wait. During this phase, the mobile device automatically reconnects to the Wi-Fi network or the initial data network.
PAGE 10
SmegConnect 2.7 Connection information 14.Wait for the beep. The Access Point credentials change procedure is completed. The device is connected to the Internet again and can be remotely controlled. The device supports network names (SSID) up to 24 digits (including spaces) and WPA2 security settings (not WEP or WPA) If Connection Failed is displayed during registration, it means that some passages of the procedure did not work properly or were interrupted.
PAGE 11
SmegConnect To delete the registration of the appliance: • Access the App, go to the Settings menu of the product pages and follow the instructions. The product can be registered again following the procedure described above. To delete the user registration: • Access the App, go to the My account menu and follow the instructions indicated in the privacy policy. 2.9 Software updates This stage does not require any activity of the user. EN 2.
PAGE 12
SmegConnect 2.10 What to do if... Once the product is registered, the display shows alternating with the temperature value. If this condition continues for more than one minute, there might be problems in the remote connection: • Check if the Wi-Fi router is switched on. • Ensure that the Wi-Fi router is not too far. • Check the conditions of the Wi-Fi network (2.4 GHz band). • Check the conditions of the Internet connection.