Installation Instructions

Use
16
3.3 Opening and closing of the door
1. To open the door, simply press lightly on
the lower left side. A push-pull
mechanism gently pushes the door
away from the magnet.
Now you can open the door completely.
2. To close the door, place the closure
block against the push-pull mechanism
and exert a light pressure on the lower
left side.
Push-pull mechanism
It may be necessary to adjust the push-pull
mechanism to optimize opening and
closing the door.
1. Open the door.
2. Turn the piston of the push-pull
mechanism to the right or to the left,
depending on the adjustment to be
made.
3. Close the door and verify that the push-
pull mechanism has been correctly
adjusted.
4. If further adjustment is required, repeat
the steps starting from point 1.
NOTE:
The rotation of the piston goes
from -
1
/
32
“ (-1 mm) to the right to
-
1
/
32
“ (+4 mm) the left.