Installation Instructions

Warnings
6
• Never disconnect the appliance
by pulling the power cord. Always
hold the plug firmly and pull it out
of the socket to avoid damaging
the power cord.
• Do not damage or perforate
refrigerant pipes.
• DO NOT MODIFY THE
APPLIANCE.
• Do not attempt to repair the
appliance yourself or without the
intervention of a qualified
technician.
• Qualified personnel should carry
out the installation and servicing in
compliance with existing
regulations.
• Non-polluting, recyclable
materials are used for the
packaging of the appliance. Take
packaging materials to
appropriate recycling centers.
• Do not use sharp instruments,
rubbing alcohol, flammable
liquids, or abrasive cleaners to
remove tape glue. Clean only with
hot water.
1.4 Installation cautions
• Install the appliance on a level
surface.
• Avoid exerting too much pressure
on the door when it is open.
• Be careful not to scratch or
damage the floor during
installation of the appliance.
• Do not push or drag the appliance
when you try to move it, as it may
damage the floor.
• Never cover or block the
appliance's ventilation openings.
• The appliance must not be
installed on a stand.
• To avoid possible overheating,
the appliance must not be
installed behind a decorative
door or panel.
• Qualified personnel should carry
out the installation and servicing in
compliance with existing
regulations.
CAUTION