Installation Instructions

Use
21
EN
Activated carbon filter
To replace the activated carbon filter:
1. Turn the filter cap 90° to the right or left.
2. Extract the cap from its seat.
3. Replace the old activated carbon filter
with a new one.
4. Replace the filter cap following the
instructions in points 1 and 2.
Operating noises
The compartment is cooled by a
compression system. To maintain the
selected temperature inside the
compartment, the compressor starts working
and, depending on the requested
temperature, it can operate continuously if
necessary. When the compressor starts
there is a buzzing sound that tends to
decrease in intensity after a few minutes.
Another noise related to the normal
operation of the appliance is gurgling due
to the passage of the refrigerant inside the
pipes of the circuit. This noise is normal and
is not a sign of machine malfunction.
Shutdown
If unused for a long time, it is advisable to
turn the appliance off.
1. On the control panel, press the ON/
OFF button for a few seconds until
the appliance turns off.
2. Remove the plug from the electrical
socket.
3. Empty the compartment.
4. Dry off any accumulated residual
moisture with a soft cloth.
5. Leave the door ajar to prevent moisture
and stagnant air from generating
unpleasant odors.
NOTE:
For optimal air quality inside the
compartment, the activated
carbon filter must be replaced at
least once a year.
NOTE:
Replacement filters can be
ordered from authorized service
centers.