Installation Instructions

Use
22
3.6 Alarms
Each alarm is accompanied by flashing text
on the display, the illumination of the
Alarm button, and an acoustic signal.
The display continues to flash until the alarm
status is eliminated.
• To turn off the alarm, press the Alarm
button.
Temperature alarm
The temperature on the display starts to
flash. This means that the temperature inside
the compartment is too high or too low
compared to the set temperature.
This can occur:
• When the appliance is first turned on.
• If a temperature much higher or lower
than the previous value is set.
• If the compartment is filled with many
bottles at room temperature.
• In case of prolonged interruption of the
electrical power.
These conditions can occur during the
normal operation of the appliance and are
not caused by problems/malfunctions.
In this case, turn off the alarm using the
Alarm button and wait until the
temperature returns to normal storage
values. It may be necessary to repeat this
operation once or twice.
NOTE:
Alarms are triggered to help
protect the wine from temperatures
that could compromise its quality.
NOTE:
If the alarm continues to be
triggered, contact the technical
support service.