User manual

Use
20
Operating noises
The compartment is cooled by a
compression system. To maintain the
selected temperature inside the
compartment, the compressor starts working
and, depending on the requested
temperature, it can operate continuously if
necessary. When the compressor starts
there is a buzzing sound that tends to
decrease in intensity after a few minutes.
Another noise related to the normal
operation of the appliance is gurgling due
to the passage of the refrigerant inside the
pipes of the circuit. This noise is normal and
is not a sign of machine malfunction.
Shutdown
If unused for a long time, it is advisable to
turn the appliance off.
1. On the control panel, press the ON/
OFF button for a few seconds until
the appliance turns off.
2. Remove the plug from the electrical
socket.
3. Empty the compartment.
4. Dry off any accumulated residual
moisture with a soft cloth.
5. Leave the door ajar to prevent moisture
and stagnant air from generating
unpleasant odors.
3.5 Alarms
Each alarm is accompanied by flashing text
on the display and an acoustic signal.
The display continues to flash until the alarm
status is eliminated.
• To turn off the alarm, press any button
on the control panel.
Temperature alarm
The temperature on the display starts to
flash. This means that the temperature inside
the compartment is too high or too low
compared to the set temperature.
This can occur:
• When the appliance is first turned on.
• If a temperature much higher or lower
than the previous value is set.
• If the compartment is filled with many
bottles at room temperature.
• In case of prolonged interruption of the
electrical power.
NOTE:
Alarms are triggered to help
protect the wine from temperatures
that could compromise its quality.