FAQ

Installation
6
2 Fixing brackets
2.1 Cover panel
1. Fasten the panel (supplied by the
furniture vendor) to the bracket A using
the screws provided.
2.2 Lower fixing plates
2. Carefully lay the appliance over on its
back.
3. Screw in the lower fixing plates B as
shown in the figure below.
The supplied brackets are an
integral part of the product and
must be fastened to the appliance
before installing it.
NOTE:
The screws may be used as one
wishes thanks to the slots on the
bracket.
NOTE:
the side slots of the fixing plates
must be turned towards the side of
the appliance.