FAQ

Installation
9
EN
2.4 Option 2: Installation with panel
over the appliance
4. Raise the appliance vertically.
5. If it is already mounted, remove the
bracket C from the top of the appliance
as shown in the figure below.
6. Screw in the upper fixing plates D as
shown in the figure below.
7. Fasten the panel (previously mounted on
the bracket) to the top of the appliance.
8. Align the front of the panel with the
appliance door using the slots on the
bracket.
NOTE:
the side slots of the fixing plates
must be turned towards the side of
the appliance.