DGA39EX DHT39PLIT Dryer User Manual Asciugatrice Manuale utente 2960311853_EN/231018.
Please read this user manual first! Dear Customer, Thank you for prefering a Smeg product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well.
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.
Important instructions for safety and environment 1.1.1 Electrical safety Electrical safety instructions should be followed while electrical connection is made during the installation. The appliance must not be supplied through an external switching device, such as a timer,or connected to a circuit that is regularly switched on and off by utility. A A • Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label.
Important instructions for safety and environment 1.1.2 Product safety Points to be taken into consideration for fire hazard: Below specified laundry or items must not be dried in the dryer considering fire hazard. • Unwashed laundry items • Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
Important instructions for safety and environment that contains metal reinforcements should not be dried A Underwear in the dryer. Dryer may be damaged if metal reinforcements come C C loose and break off during drying. Use softeners and similar products in accordance with the instructions of their manufacturers. Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed. • Never attempt to repair the dryer by yourself.
Important instructions for safety and environment A Washing machine cannot be placed on the dryer. Pay attention to the above warnings during the installation on your washing machine. Dryer Depth Installation Table for Washing Machine and Dryer Washing Machine Depth 54 cm 60 cm 62 cm 60 cm 54 cm 50 cm 49 cm 45 cm Can be installed Can be installed Can be installed Cannot be installed 40 cm Cannot be installed 1.3 Intended use • Dryer has been designed for domestic use.
Important instructions for safety and environment 1.5 Compliance with the WEEE regulation and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life.
Important instructions for safety and environment 1.8 Technical Specifications EN Height (Min. / Max.) Width Depth Capacity (max.) Net weight (± 4 kg) Voltage Rated power input Model code 84,6 cm / 86,6 cm* 59,7 cm 65,4 cm 9 kg** 51 kg See type label*** * Min. height: Height with adjustable feet are closed. Max. height: Height with adjustable feet are opened maximum. ** Dry laundry weight before washing. *** Type label is located behind the loading door.
2 Your Dryer 2.1 Package Contents 1 2 3 4 5 1. Water drain hose * 2. Filter drawer spare sponge* 3. User Manual 4. Drying basket* 5. Drying basket user manual* *It can be supplied with your machine depending on its model.
3 Installation Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user’s manual. (See 3.3 Connecting to the drain and 3.5 Electrical connection) If they are not suitable, contact a qualified electrician and technician to make necessary arrangements. C A A Preparation of the dryer's location as well as the electrical and waste water installations is under customer's responsibility.
Installation 1 2 3 4 A C C • C Water collected during operation is pumped to water tank. It is normal to hear pumping noise during this process. Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine. Never unscrew the adjustable feet from their housings. 3.5 Electrical connection For specific instructions for electrical connection required during installation (see 1.1.1 Electrical Safety) 3.
4. Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.
Preparation • • Door Inner Surface) Clean the filter periodically when there is visible air collection on it or when the symbol lights up, if there is a filter drawer cleaning warning symbol « » available. (See 6. 4 Cleaning the filter drawer) Ventilate the room, where the dryer is located, well during drying. 4.5 Correct load capacity Follow the instructions in the “Programme selection and consumption table”. Do not load more than the capacity values stated in the table.
5 Operating the product 5.1 Control panel 1 2 3 4 10 9 8 5 6 7 1. Programme Selection knob 2. Dryness Level Adjustment button 3. Audio Warning Level button 4. Display 5. On /Off/Cancel button 6. Start/Pause button 7. End Time button 8. Favourite button 9. Timer Programmes Selection button 10. Anti-creasing button 5.
Operating the product Anti Creasing Child-proof lock C 5.3 Preparing the machine 1. 2. 3. 4. Plug in your machine. Place the laundry in the machine. Press the On/Off/Cancel button for 1 second (long). When your machine is operated for the first time, it starts with the declaration programme (wardrobe dryness for cottons.) C Pressing the On/Off/Cancel button does not mean that the programme has started. Press Start / Pause button to start the program. 5.4 Programme selection 1. 2.
Operating the product • Mix • WoolProtect Use this programme to dry non-pigmenting synthetic and cotton laundry items together. Use this programme to dry woolen garments such as jumpers that are washed according to the instructions. It is recomended that garments would be removed at the end of the programme.
Operating the product 5.
Operating the product 5.8 Auxiliary functions Audio Warning The machine will give an audio warning when the programme comes to an end. Use the Audio Warning Level button to adjust the sound level. C You can change the sound level either before the programme starts or while the programme is in progress. Dryness level adjustment selection Dryness level adjustment button is used to adjust the required dryness level. Programme duration can change depending on the selection.
Operating the product Anti-creasing Anti-creasing programme duration may be changed with the Anti-creasing selection button. You can use Anti-creasing function to prevent laundry from creasing if you will not take the laundry out after the program has come to an end. This programme rotates the laundry in every 240 second for selected time to prevent creasing.Following images identify the level changes.
Operating the product C If loading door is opened and closed during the End Time duration, the programme will switch to pause mode. End Time function should be resumed with pressing Start/Pause button. Changing the End time If you want to change the time during countdown: • End Time is deactivated when the dryer is switched off and on with On/Off/Cancel button. Restart the dryer and repeat the End Time procedure for the desired time.
Operating the product 5.10 Starting the programme To deactivate the childproof lock: 5.11.Progress of programme 5.13 Changing the programme after it has started Press the Start/Pause button to start the program. Start symbol will light up to indicate that the programme has started and “:” symbol in the middle of the remaining time will keep flashing. Drying and programme progress bar will be displayed alternately. • • • • • • 5.
Operating the product 5.14 Canceling the programme To cancel the programme after the dryer is started: • Press and hold Start / Pause button for 1 seconds to pause the programme and turn the programme selection knob. • Press and hold On / Off / Cancel Button for 3 seconds and the programme will be cancelled. A As the dried laundry will be excessively hot when you cancel the programme while the dryer is running, activate the Refresh programme to cool them down. 5.
6 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 6.1 Cleaning Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter. C A C Such fiber and lint are generally formed during wearing and washing. Always clean the lint filter and the inner surfaces of the loading door after each drying process.
Maintenance and cleaning C A Do not use metal tools when cleaning metal surfaces of the sensors. • Drain the water in the tank. • If there is lint accumulation in the funnel of the water tank, clean it under running water. Place the water tank into its seat. Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! • 6.
Maintenance and cleaning • Pull out the filter drawer. • Open the filter drawer by pressing the red button. • • • Close the filter drawer as to lock the red button. • Place the filter drawer back into its place, turn the filter drawer cover in the arrow direction and close it securely. • Close the kick plate cover. Take out the filter drawer sponge. Wash the filter drawer sponge by hand to remove the fiber and lint on the surface.
Maintenance and cleaning A C Drying without the filter drawer sponge in place will damage the machine! A dirty lint filter and filter drawer will cause longer drying periods and higher energy consumption. 6.5 Cleaning the evaporator Clean the lint accumulated on the fins of the evaporator located behind the filter drawer with a vacuum cleaner. A You can also clean by hand provided that you wear protective gloves. Do not attempt to clean with bare hands. Evaporator fins can harm your hand.
7 Troubleshooting Drying process takes too much time. • Pores of the lint filter are clogged. >>> Wash the lint filter with warm water. • Filter drawer may be blocked>>>clean the foam inside the filter drawer. • Ventilation grids on the front side of the machine are blocked. >>> Remove the objects (if any) that block ventilation in front of the ventilation grids. • Ventilation is not sufficient since the room where the machine is installed is very small.
Troubleshooting Lint Filter Cleaning symbol is on. • Lint filter is not cleaned. >>> Clean the lint filter. Lint Filter Cleaning symbol is flashing. • Filter housing is clogged with lints. >>> Clean the lint filter housing. • A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with warm water. • Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 392/2012 Supplier name or trademark Smeg Model name DGA39EX-DHT39PLIT 9 Rated capacity (kg) Air Vented Type of Tumble Dryer - Condenser A+++ Energy efficiency class (1) Annual Energy Consumption (kWh) (2) 194 Automatic Type of Control Non-automatic - Energy consumption of the standard cotton programme at full load (kWh) 1,64 Energy consumption of the standard cotton programme at partial load (kWh) 0,86 Power consumption o
