FA160X FA161MX FA162MX Read this user guide thoroughly and carefully before using for your safety and optimal performance of refrigerator.
Be sure to keep for safety ! Read these safety instructions thoroughly and carefully before using. Please keep this user guide to hand for future reference. Indicates the possibility of danger of death or serious injury Indicates the possibility of risk of personal injury or material damage WARNING CAUTION Other Signs DO NOT remove or disassemble! NO., DO NOT... Be sure to unplug from receptacle(outlet/mains)! Be sure to keep and follow! Caution 1.
WARNING WARNING Do not install the refrigerator on a wet floor or in a place with much humidity moisture. Let the cord from the plug outlet be directed Downwards. If it is directed up, the cord near the plug is bent and can be damaged, which can cause an electric shock or fire. Do not store medicine, academic research samples which require strict temperature control in the refrigerator. Never insert fingers or hands into the bottom of refrigerator, especially into the bottom back.
Installation Guide Control Panel ❈ Read these safety instructions carefully before use and follow precautions for your safety. Dispenser Model Precautions in installation and power connection To prevent fire, electric shock or leakage Never install the refrigerator on a wet, watery floor or where water can easily gather. Check the following before power connection. Connect power plug only to a grounded wall receptacle (an earthed mains).
Temperature Control When this refrigerator is first plugged in, the temperature mode is set to [Middle]. How To change the lnterior Light Bulb The lamp shall be replaced only by a service agent or similarly qualified person. Dispenser Model Change of Freezer Lights Freezer Compartment Refrigerator Compartment Push the FREEZER SET. button and the setting temperature changes as the figure shows. Remove the 2 screws retaining the light cover.
Caution How to use the interior parts Do not touch or hold with wet hands foods (foods container) in the freezer compartment. There is a risk of chilblains (cold burn) Do not store medicine, academic research samples etc. in the refrigerator. Do not store vegetables in the chilled room, for they can be frozen. Basic Model Interior Parts Egg case can be placed on a refrigerator shelf as you like.
How to use the Automatic Icemaker Magic cool zone (Option) (For Dispenser models) Magic cool zone Contol graphic and Control function When you plug in first, “OFF” LED is ON. You can choose “OFF” “VEGETABLE” “SELECT” button. Step OFF VEGETABLE FISH MEAT “FISH” “MEAT” by pushing the About 10 icecubes (7~8 times a day) are made at one time. If the ice storage case is full, icemaking stops. It is normal for the icemaker to make banging sounds when the icecubes are falling into the ice storage case.
Care & Cleaning Dairy Pocket How to Clean Diary Pocket Cover ; Open the cover a little, hold both ends and push left to remove. Be sure to unplug first ! Interior Parts Diary Pocket ; Hold both ends and pull upward to remove. ❈ Full - option models illustrated. Use cloth with water and mild(neutral) detergent to clean. Freezer & Refrigerator Pockets Hold both ends and pull up. Door Packing Use cloth with mild(neutral) detergent.
Something strange ? Don t worry. Here is the answer. Before You Call for Service... Please checkup the following troubleshooting tips before you call for service ! Case Problem It never gets cold inside. Freezing & refrigerating is not so good. Foods in the refrigerator get frozen. Checkup Point Action Is the refrigerator unpluged ? Plug in the refrigerator. Is the temperature set to [Low Mode] ? Set the temperature mode to Middle or High.
If the refrigerator can not pass through a door during installation, follow these steps. Installation Preparation Check if the refrigerator can pass a doorway or enter a door first. Dimensions (including Door Handles) (Width*Depth*Height) 903mm 734.5mm Removing Freezer Door Remove the bottom cover first. Pull out the left collar of the coupling first, then hold the coupling and pull out the left water tube. (Dispenser Models Only) 1 1790mm 2 Remove front bottom cover first, if it is attached.
Refrigerator Leveling & Door Adjustment ( If needed. ) Refrigerator must be level in order to maintain optimal performance and desirable front appearance. (If the floor beneath the refrigerator is uneven, freezer and refrigerator doors look unbalanced.) In case freezer door is lower than refrigerator door... Replacing Freezer Door Insert the bottom hole of freezer door the water tube into the hole of the Let the top of door close to the straight to the bottom hinge pin.
How to install Water Line (Dispenser Models Only) 1. The water pressure should be 2.0~12.5kgf/cm or more to run the automatic icemaker. Checkup your tap water pressure ; if a cup of 180cc is full within 10 seconds, the pressure is OK. 3. Remove any substances in the filter. 2 WATER SUPPLY KIT Check the parts below for installing water supply. Some other necessary parts are available at your local service agents. 2. When installing the water tubes, ensure they are not close to any hot surfaces. 3.