Instruction manual

35
EN
8 Before calling after-sales
service
Errors
Your appliance will warn you if the tem-
peratures for the appliance and freezer
are at improper levels or if a problem
occurs with the appliance. Warning
codes are displayed in the freezer and
refrigerator indicators.
Before calling after-sales service
ERROR
TYPE
MEA-
NING
WHY WHAT TO DO
E01
Sensor
warning
Call Service for assistance as soon as possible.
E02
Sensor
warning
Call Service for assistance as soon as possible.
E03
Sensor
warning
Call Service for assistance as soon as possible.
E06
Sensor
warning
Call Service for assistance as soon as possible.
E07
Sensor
warning
Call Service for assistance as soon as possible.
E08
Low
Voltage
War-
ning
Power supply to
the device has
dropped to below
170 V.
--This is not a device failure, this error helps to prevent da-
mages to the compressor.
--The voltage needs to be increased back to required levels
If this warning continues an authorised technician needs to
be contacted.
E09
Freezer
com-
part-
ment is
not cold
enough
Likely to occur
after long term
power failure.
1. Set the freezer temperature to a colder value or set Super
Freeze. This should remove the error code once the required
temperature has been reached. Keep doors closed to impro-
ve time taken to reach the correct temperature.
2. Remove any products which have thawed/defrosted
during this error. They can be used within a short period
of time.
3. Do not add any fresh produce to the freezer compart-
ment until the correct temperature has been reached and
the error is no longer.
If this warning continues an authorised technician needs to
be contacted.