Instruction manual

47
EN
6.2 Positioning
Heavy appliance
Crushing hazard
• Position the appliance with the aid
of a second person.
Pressure on the open door
Risk of damages to the ap-
pliance
• Never use the open door to lever
the appliance into place when
tting.
• Avoid exerting too much pressure on
the door when open.
• The appliance must not be exposed
to direct sunlight.
• The appliance must not be placed
near sources of heat. If this is not
possible, a suitable insulation panel
must be used.
• Do not use the appliance outdoors.
Choice of location
Always install the appliance in a dry
place with satisfactory ventilation.
• The appliance must not be installed
near heat sources. If this is not possi-
ble, a suitable insulation panel must
be used.
• If installed underneath wall units, at
least 5 cm clearance must be left.
• Ensure that the appliance is located
with sufcient space for the door to
open and for the internal drawers
and shelves to be removed, if neces-
sary.
• Your appliance is designed to
operate in the ambient temperature
(T/SN = 10°C - 43°C) intervals
stated in the standards, according
to the climate class displayed on
the information label. We do not re-
commend operating your appliance
out of the stated temperature limits in
terms of cooling effectiveness.
Important installation instructions
This appliance is designed to work
in difcult climate conditions and is
powered with ‘Freezer Shield’ techno-
logy which ensures that the frozen food
in the freezer will not defrost even if
the ambient temperature falls as low as
-15 °C. So you may then install your
appliance in an unheated room without
having to worry about frozen food
in the freezer being spoilt. When the
ambient temperature returns to normal,
you may continue using the appliance
as usual.
Class Room temperature
SN (Subnormal) + 10°C to + 32°C
N (Normal) + 16°C to + 32°C
ST (Subtropical) + 18°C to + 38°C
T (Tropical) + 18°C to + 43°C
Installation