User manual

Installation
48
Choice of location
Always install the appliance in a dry place
with satisfactory ventilation. Depending on
its climate class (stated on the nameplate
inside the refrigerator compartment), the
appliance can be used in different
temperature conditions.
• Install the appliance at least 5 cm away
from electrical or gas cookers and at
least 50 cm away from combustion
heaters or radiators.
• The appliance must not be installed near
heat sources. If this is not possible,
suitable insulation must be used.
• If installed underneath wall units, at least
15 cm clearance must be left.
• Ensure that the appliance is located with
sufficient space for the door to open and
for the internal drawers and shelves to be
removed, if necessary.
Spacers
To ensure proper cooling of the condenser,
the appliance must not be placed too close
to the wall. To prevent this, the appliance
comes complete with two plastic spacers
which must be fitted to the top of the
condenser.
To position the spacers fit them between the
vertical fins of the condenser (1), then rotate
them by 90 degrees clockwise or
counterclockwise, to secure them (2).
Class Room temperature
SN (Subnormal) + 10°C to + 32°C
N (Normal) + 16°C to + 32°C
ST (Subtropical) + 18°C to + 38°C
T (Tropical) + 18°C to + 43°C