User manual

Installation
49
EN
Positioning
Position the appliance on a firm, level
surface.
We recommend moving the appliance very
carefully in order to avoid damaging the
floor (especially if the refrigerator is
positioned on wooden floors or linoleum).
If the floor is not perfectly level, use the four
adjustable feet on the front part of the
appliance.
Level the appliance horizontally adjusting its
feet.
Lean the appliance slightly towards the rear
part to facilitate proper door closure.
A few days after installation, check that the
initial level adjustment is still correct. Make
sure that the appliance is still stable and the
door seals still close hermetically when it is
in operation and loaded with food. If
necessary, re-adjust the level and the seals.
In order for the freezer to be
installed correctly, the door must
be able to close properly. Ensure
that the door seals close
hermetically, especially at the
corners.
Pressure on the seal
Risk of damage to the appliance
• Do not press, do not tear or detach the
seal from the door.