User manual

34
Use
3 Use
3.1 Instructions
3.2 Preliminary operations
1. Remove any protective film from the
outside or inside of the appliance,
including accessories.
2. Remove any labels (apart from the
technical data plate) from the
accessories and shelves.
3. Remove and wash all the appliance
accessories (see 4 Cleaning and
maintenance).
3.3 First use
Plug the appliance into a wall socket.
To turn the appliance on, turn the thermostat
knob on the control panel from position
(off) to position 1 - 7, according to the
desired temperature.
3.4 Using the accessories
Shelves
These can be positioned at different heights
on the guides according to requirements.
Each shelf has a safety fitting to prevent it
from being accidentally removed. To extract
them fully, lift up the rear part (1) and
remove them (2).
Improper use
Risk of damages to the appliance
• Do not use sharp objects when
removing ice and frost in order not to
damage the appliance's walls.
• Do not sit or lean on the door or any
open drawers.
• Do not touch the heating elements on
the outside of the appliance.
• Do not store inflammable, explosive or
volatile substances.
• Organic compounds, acids and
essential oils can corrode the seals and
plastic surfaces if left in contact with them
for extended periods.
• Bottles containing strong alcoholic
drinks must be tightly closed and stored
vertically.
After installing or repositioning the
appliance, wait at least two hours
before activating it.
The higher the number set
(from 1 to 7), the lower the fridge
temperature will be.
Perishable foods should be placed
on the rear part of the shelves
where the temperature is lower.