User manual

42
Cleaning and maintenance
4.4 Replacing the lamp
The bulb is at the side of the control
panel; to replace:
1. Unscrew and remove the lamp.
2. Replace the lamp with one of the same
type.
4.5 What to do if...
The appliance does not work:
• Make sure that the appliance is plugged
in and that the main switch is turned on.
The compressor starts to function too often
or functions continuously:
• The room temperature is too high.
• The door is being opened too often or
for too long.
• The door is not closing/sealing properly.
• The freezer is loaded with too many
fresh foods.
• Check that sufficient air can circulate
around the sensor on the right-hand side
of the refrigerator compartment.
• Check that the back of the freezer is
properly ventilated and that the
condenser is not too dirty.
Excessive ice or condensation has built up
inside the refrigerator compartment:
• The door is being opened too often or
for too long.
• Hot foods have been placed inside the
refrigerator compartment.
• The foodstuffs or containers are in
contact with the rear wall.
• The door seal is damaged or dirty.
Clean or replace it.
Water is forming inside the refrigerator
compartment:
• The drainage channel or opening is
blocked.
Power voltage
Danger of electrocution
• Turn off the appliance and unplug it from
the mains before replacing the bulb.
Only use C25-E14 LED bulbs,
max. 15 W.