Instruction manual

20 - PRECAUTIONS 914779596/B
substances.
• Do not keep explosive
substances, such as spray
bottles with flammable
propellants in the appliance.
• Bottles containing strong
alcoholic drinks must be tightly
closed and stored vertically.
• Organic compounds, acids
and essential oils can corrode
the seals and plastic surfaces if
left in contact with them for
extended periods.
• Turn off the appliance and
unplug it from the mains before
cleaning or maintenance.
• Do not pull the cable to unplug
the appliance.
Risk of damaging the appliance
• Never rest sharp metal objects
such as knives, forks, spoons
and lids on the appliance
during use.
• Do not use abrasive or
corrosive detergents (e.g.
scouring powders, stain
removers and metallic
sponges) on glass parts.
• Do not sit on the appliance.
• Do not sit or lean on the door
or any open drawers.
• Do not prize on the door or
handle to move the appliance.
• Do not use steam jets to clean
the appliance.
• Do not use electrical
appliances (e.g. hair dryers) or
sprays for defrosting, the plastic
parts could be damaged.
• Do not use the appliance to
cool rooms for any reason.
• Always unplug the appliance in
the event of a fault or when
performing cleaning or
maintenance.
• Do not keep liquids in tins or
glass containers in the freezer.
• Do not use sharp metal objects
to remove excess ice build-up
in the freezer compartment.
• Do not use adaptors for plugs.
• CAUTION: do not place
portable multiple sockets or
portable power supply units at
the back of the appliance.
• Do not place heavy objects on
the top of the appliance.
• Do not use sharp objects when
removing ice and frost in order
not to damage the appliance's
walls.
Installation and maintenance
• The appliance must be
connected to ground in
compliance with electrical
system safety standards.
• Position the appliance with the
aid of a second person.
• Never use the open door to
lever the appliance into place
when fitting.
• Avoid exerting too much
pressure on the door when
open.
• The appliance must not be
installed near heat sources. If