Instruction manual

INSTALLATION - 35914779600/C
e
class (stated on the nameplate inside the
refrigerator compartment), the appliance can
be used in different temperature conditions.
• Install the appliance at least 3 cm away
from electrical or gas cookers and at least
30 cm away from combustion heaters or
radiators.
• The appliance must not be installed near
heat sources. If this is not possible, suitable
insulation must be used.
• If installed underneath wall units, at least 5
cm clearance must be left.
• Ensure that the appliance is located with
sufficient space for the door to open and for
the internal drawers and shelves to be
removed, if necessary.
Spacers
To ensure proper cooling of the condenser, the
appliance must not be placed too close to the
wall. To prevent this, the appliance comes
complete with two plastic spacers, which must
be fitted in the rear part of the appliance.
Positioning
Position the appliance on a firm, level surface.
The appliance has two small wheels on the
back to allow it to be moved and positioned
more easily.
In any case, we recommend moving the
appliance very carefully in order to avoid
damaging the floor (especially in the case of
wooden floors).
If the floor is not perfectly level, use the two
adjustable feet on the front part of the
appliance.
Level the appliance horizontally adjusting its
feet.
Class Room temperature
SN (Subnormal) + 10°C to + 32°C
N (Normal) + 16°C to + 32°C
ST (Subtropical) + 18°C to + 38°C
T (Tropical) + 18°C to + 43°C
Lean the appliance slightly towards the
rear part to facilitate proper door
closure.