Instruction manual

22 - PRECAUTIONS 914779600/C
Do not touch (especially with
wet hands) frozen products or
put them in your mouth directly.
Do not store inflammable,
explosive or volatile
substances.
Do not keep explosive
substances, such as spray
bottles with flammable
propellants in the appliance.
Bottles containing strong
alcoholic drinks must be tightly
closed and stored vertically.
Organic compounds, acids
and essential oils can corrode
the seals and plastic surfaces if
left in contact with them for
extended periods.
Turn off the appliance and
unplug it from the mains before
cleaning or maintenance.
Do not pull the cable to unplug
the appliance.
Risk of damaging the appliance
Never rest sharp metal objects
such as knives, forks, spoons
and lids on the appliance
during use.
Do not use abrasive or
corrosive detergents (e.g.
scouring powders, stain
removers and metallic
sponges) on glass parts.
Do not sit on the appliance.
Do not sit or lean on the door
or any open drawers.
Do not prize on the door or
handle to move the appliance.
Do not use steam jets to clean
the appliance.
Do not use electrical
appliances (e.g. hair dryers) or
sprays for defrosting, the plastic
parts could be damaged.
Do not use the appliance to
cool rooms for any reason.
Always unplug the appliance in
the event of a fault or when
performing cleaning or
maintenance.
Do not keep liquids in tins or
glass containers in the freezer.
Do not use sharp metal objects
to remove excess ice build-up
in the freezer compartment.
Do not use adaptors for plugs.
CAUTION: do not place
portable multiple sockets or
portable power supply units at
the back of the appliance.
Do not place heavy objects on
the top of the appliance.
Do not use sharp objects when
removing ice and frost in order
not to damage the appliance's
walls.
Installation and maintenance
The appliance must be
connected to ground in
compliance with electrical
system safety standards.
Position the appliance with the
aid of a second person.
Never use the open door to
lever the appliance into place
when fitting.