Instruction Manual

Installation
27
EN
appliance can be used in different
temperature conditions.
• The appliance must not be installed near
heat sources. If this is not possible,
insulate properly.
• To ensure proper ventilation for your
appliance allow 1 ¼” (3 cm) space on
each side.
• If installed underneath wall units, at least
3” (7.6 cm) clearance must be left.
• Ensure that the appliance is located with
sufficient space for the door to open and
for the internal drawers and shelves to be
removed, if necessary. Leave 14 ½”
(36,8 cm) minimum on the hinge side to
allow for the door to swing open.
Spacers
To ensure proper cooling of the condenser,
the appliance must not be placed too close
to the wall. To prevent this, the appliance
comes complete with two plastic spacers,
which must be fitted in the rear part of the
appliance.
Positioning
Position the appliance on a firm, level
surface.
The appliance has two small wheels on the
back to allow it to be moved and
positioned more easily.
Class Room temperature
SN (Subnormal) + 50°F to + 89°F
N (Normal) + 61°F to + 89°F
ST (Subtropical) + 64°F to + 100°F
T (Tropical) + 64°F to + 109°F