Instruction manual

53
EN
Installation
ERROR
TYPE
MEANING WHY WHAT TO DO
E10
Refrigera-
tor com-
partment
is not cold
enough
Likely to occur
after:
1. Set the refrigerator temperature to a colder value
or set Super Cool. This should remove the error code
once the required temperature has been reached.
Keep doors closed to improve time taken to reach the
correct temperature.
--Long term
power failure.
2. Please empty the location at the front area of air
duct channel holes and avoid putting food close to the
sensor.
--Hot food has
been left in the
fridge.
If this warning continues an authorised technician ne-
eds to be contacted.
E11
Refri-
gerator
compart-
ment is
too cold
Various
1. Check is Super Cool mode is activated
2. Reduce the refrigerator compartment temperature
3. Check to see if vents are clear and not clogged
If this warning continues an authorised technician ne-
eds to be contacted.
9 Practical energy saving
advice
Read the entire manual for information
regarding this topic.