User Manual

28
In order for the freezer to be
installed correctly, the door
must be able to close properly.
Ensure that the door seals close
hermetically, especially at the
corners.
Pressure on the seal
Risk of damage to the appli-
ance
• Do not press, do not tear or detach
the seal from the door.
A few days after installation, check
that the initial level adjustment is still
correct. Make sure that the appliance is
still stable and the door seals still close
hermetically when it is in operation and
loaded with food.
If necessary, re-adjust the level and the
seals.
7 Shipment and repositioning
7.1 Transportation and Changing
Positioning
• The original packaging and foam
may be kept for re-transportation
(optional).
• Fasten your appliance with thick
packaging, bands or strong cords
and follow the instructions for trans-
portation on the packaging.
• Remove all movable parts (shelves,
accessories, vegetable bins, and so
on) or x them into the appliance
against shocks using bands when
re-positioning or transporting.
Always carry your appliance in the
upright position.