User manual

32
10. Before calling service
Errors
Your appliance will warn you if the tem-
peratures for the appliance and freezer
are at improper levels or if a problem
occurs with the appliance. Warning
codes are displayed in the freezer and
refrigerator indicators.
ERROR
TYPE
MEAN-
ING
WHY WHAT TO DO
E01
Sensor
warning
Call Service for assistance as soon as possible.
E02
Sensor
warning
Call Service for assistance as soon as possible.
E03
Sensor
warning
Call Service for assistance as soon as possible.
E06
Sensor
warning
Call Service for assistance as soon as possible.
E07
Sensor
warning
Call Service for assistance as soon as possible.
E08
Low
Voltage
Warn-
ing
Power supply to
the device has
dropped to below
170 V.
--This is not a device failure, this error helps to pre-
vent damages to the compressor.
If this warning continues, contact Smeg Service.
E09
Freezer
compart-
ment is
not cold
enough
Likely to occur
after long term
power failure.
1. Set the freezer temperature to a colder value or
set Super
Freeze. This should remove the error code once the
required temperature has been reached. Keep doors
closed to improve time taken to reach the correct
temperature.
2. Remove any products which have thawed/de-
frosted during this error. They can be used within a
short period of time.
3. Do not add any fresh produce to the freezer
compartment until the correct temperature has been
reached and the error is no longer.
If this warning continues, contact Smeg Service.
Installation