Operation Manual

7
DISPOSAL OF THE
APPLIANCE
The appliance contains recyclable
materials. When disposing of the
appliance, please contact the technical
administration or other appropriate
authority in your municipality. They
can inform you of the collection and
recycling measures used in the
municipality.
9. CHANGE OF HINGE SIDE
See drawings page 26.
1) Dismantle the top hinge. This one is to
be used later as top hinge at the oppo-
site side. Lift off the top door.
2) On appliances with a door closer on the
upper door, this door closer should be
removed and remounted on the opposite
side.
3) Dismantle the middle hinge. Lift off the
bottom door. Mount the hinge screws
again
4) Remove the kick panel.
The bottom hinge is dismounted at the 3
screws. The hinge is turned 180° and
mounted on the opposite side..
5) Dismantle the screws in the middle of
the new hinge side. Mount the bottom
door and screw on the middle hinge.
6) Adjusting the bottom door: Loosen the 3
screws in the bottom hinge and push the
bottom hinge to the required side.
Tighten the screws and mount the kick
panel.
7)
The kick panel is mounted and the hole
plugs are mounted on the opposite side.
8) Ajustment of the top door: loosen the
screws in the hinge above the door,
loosen the hinge above the door and
turn the hinge to the wanted side.
Tighten the screws.
9) Move the handle.