FD43APBNF FD43APXNF NO-FROST REFRIGERATOR NO-FROST KÜHLSCHRANK REFRIGERATEUR A FROID VENTILE NO-FROST FRIGORIFERO NO-FROST REFRIGERADOR NO-FROST FRIGORIFICO NO-FROST NO-FROST KOELKAST FROSTFRIA KYLSKÅP ХОЛОДИЛЬНИК NO-FROST
INDEX BEFORE USING THE APPLIANCE ..................................................................... 2 Recommendations ................................................................................................... 2 Installation and Switching On The Appliance ......................................................... 3 Before Switching On .................................................................................................. 3 THE VARIOUS FUNCTION AND POSSIBILITIES ........................
PART- 1. BEFORE USING THE APPLIANCE Special Instructions • If this appliance is to replace an old refrigerator with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insulation gases and refrigerant, which must be disposed of properly. Please ensure that the refrigeration tubing is not damaged.
Installation and Switching On The Appliance • This appliance is connecting to 220-240V and 50 Hz. • You can offer help from the service to install and switching on the appliance without any cost. • Before making the connection to the power supply, ensure that the voltage on the nameplate corresponds to the voltage of electrical system in your home.
PART- 2. THE VARIOUS FUNCTION AND POSSIBILITIES Thermostat Setting FREEZER THERMOSTAT REFRIGERATOR THERMOSTAT Freezer and refrigerator thermostat automatically regulates the inside temperature of the compartments. By rotating the knob from position 1 to 5, colder temperatures can be obtained. In cold seasons, you can set lower positions in order to decrease the energy consumption.
Accessories Magic Shelf (For some models) Magic shelf, which is on the crisper cover, was designed to give you more place and comfort placing the things in the appliance. This shelf is mobile so you can arrange long or big containers on the crisper cover. Making Ice Cubes • Take out the ice making tray • Fill the water in level of line. • Place the ice making tray in its original position • When ice cubes are formed, twist the lever to drop off ice cubes into the icebox.
Chiller Shelves (For some models) Keeping food in the Chiller compartment instead of the freezer or refrigerator compartment allows food retain freshness and flavour longer, while preserving its fresh appearance. When chiller tray becomes dirty, remove it and wash it with water. (Water freezes at 0°C, but foods containing salt or sugar freeze at temperature lower than that) Normally people use the chiller compartment for raw fish, lightly pickled, rice, etc...
REMOVING THE CRISPER COVER (For some models) First Step : Removing the crispers • It is easy to pull out the crisper because of the crisper has rollers. • Pull the crisper out as far as possible and pull the front part up and out Crisper Second Step: Taking out the partition crisper center between the crispers.
RESETTING THE CRISPER COVER (For some models) First Step: Settle the crisper cover • Put the crisper cover on its place fitting the nails and the cavities on the cabinet.. Cavity Nail • Then push forward the crisper cover until it fits on its place.
PART- 3. ARRANGING FOOD IN THE APPLIANCE Refrigerator Compartment • To set the refrigerator compartment to 2-3 graphic bar will be enough for normal conditions. • To reduce humidity and consequent increase of frost never place liquids in unsealed containers in the refrigerator. • Never place warm food in the refrigerator. Warm food should be allowed to cool at room temperature and should be arranged to ensure adequate air circulation in the refrigerator compartment.
• Frozen foods should be transported in appopriate containers to maintain the quality of the food and should be returned to the freezing surfaces of the unit in the shortest possible time. • If a package of frozen food shows the sign of humidity and abnormal swelling it is probable that it has been previously stored at an unsuitable temperature and that the contents have deteriorated.
Defrosting • Defrosting occurs fully automatically during operation; the defrost water is collected by the evaporating tray and evaporates automatically. Replacing The Refrigerator and Freezer Light Bulb 1. Unplug the unit from the power supply, 2. Remove the refrigerator light cover with a minus screw driver, and take out the cover.(A) 3. Change the present light bulb with a new one of not more than 15 W.(B) 4. Replace the light cover and after waiting 5 minutes plug the unit.
PART- 5. TRANSPORTATION AND CHANGING OF INSTALLATION POSITION Transportation and Changing of Installation Position • The original packages and foamed polystyrene (PS) can be concealed if required. • In transportation the appliance should be tied with a wide stripe or a strong rope. The rules written on the corrugated box must be applied while transporting. • Before transporting or changing old installation position, all the moving objects (i.e.
PART- 6. BEFORE CALLING YOUR AFTER SALES SERVICE What to do if your refrigerator does not operate; Check that; • There is no power , • The general switch in your home is disconnected , • The thermostat setting is on« 0 »position , • The socket is not sufficient. To check this, plug in another appliance that you know which is working into the same socket.
PART- 7. THE PARTS OF THE APPLIANCE AND THE COMPARTMENTS This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model.