Operation Manual

88
Dimensions for installation
The oven has an high-performance air circulation system which gives remarkable results
for cooking and cleaning, as long as the following points are applied:
The oven may be fitted either underneath a work surface or in a suitable sized col-
umn unit. Cut a hole measuring 50 mm x 50 mm in the back wall of the insert space for
the electric cable to pass through (See diagram, left).
Centre the oven in the unit, and make sure that it is at least 2 mm from any other
unit beside it.
The unit must be heat-resistant (or covered with heat-resistant material).
The oven must be disconnected from the power supply while it is being installed in
the unit.
For greater stability, fix the oven in the unit with 2 screws in the holes on the side
walls (see diagram). Make a 3 mm diameter hole in the side of the unit first to prevent the
wood from splitting.
555
595
536
22
376
380
560-568
20
50
10
50
550
mini
560-568
550 mini
400
310
388
380
99634242_ML_pyro.qxd 19/11/04 14:30 Page 88