FQ55FNDF FQ55FXDF en it pt fr sv es da fin no nl ru ar de pl FQ55FXE1 FQ55FX1 FQ55FX2PE FQ55FN2PE Instruction Manual Manuale di istruzioni Notice d'Utilisation Bruksanvisning Manual de instrucciones Brugsvejledning Käyttöohje Bruksanvisning Gebruiksaanwijzing ﺩﻟﻳﻝ ﺍﻟﻣﺳﺗﺧﺩﻡ Bedienungsanleitung Instrukcja użytkowania
Please read this manual before using the product! Dear Customer, We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls. Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product. This guide will help you use the product quickly and safely.
1. Safety and environment instructions 3 5 Using the product 1.1. General safety. . . . . . . . . . . . . . . . . . . . . . . 3 1.1.1 HC warning . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1.2 For models with water dispenser . . . . . . . . 5 1.2. Intended use. . . . . . . . . . . . . . . . . . . . . . . . 5 1.3. Child safety. . . . . . . . . . . . . . . . . . . . . . . . . 5 1.4. Compliance with WEEE Directive and Disposing of the Waste Product . . . . . . . . . 5 1.5.
1. Safety and environment instructions for their safety. Children should not be This section provides the safety instructions allowed to play with this device. necessary to prevent the risk of injury and material In case of malfunction, unplug the damage. Failure to observe these instructions will device. invalidate all types of product warranty. After unplugging, wait at least 5 Intended use minutes before plugging in again. WARNING: Unplug the product when not in use.
Safety and environment instructions Plug the product into an earthed socket. Earthing must be done by a qualified electrician. If the product has LED type lighting, contact the authorised service for replacing or in case of any problem. Do not touch frozen food with wet hands! It may adhere to your hands! Do not place liquids in bottles and cans into the freezer compartment. They may explode. Place liquids in upright position after tightly closing the lid.
Safety and environment instructions defrost, clean, dry, and leave the door open to prevent mould developing within the appliance. 1.1.1 HC warning If the product comprises a cooling system using R600a gas, take care to avoid damaging the cooling system and its pipe while using and moving the product. This gas is flammable. If the cooling system is damaged, keep the product away from sources of fire and ventilate the room immediately.
Safety and environment instructions 1.6. Package information Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
2 Refrigerator A 9 *8 *1 *2 7 *3 *6 *5 4 B AB1. 2. 3. Cooler compartment Freezer compartment Butter-cheese shelf Cooler compartment shelves Shelter wire C 4. 5. 6. 7. 8. 9. Frozen food storing compartments Vegetable bins Breakfast compartment Odour filter Adjustable glass shelves Fan *Optional: Figures in this user guide are schematic and may not exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models.
3 Installation 3.1. Right place for installation 3.2. Attaching the plastic wedges Contact the Authorized Service for the product's installation. To ready the product for installation, see the information in the user guide and make sure the electric and water utilities are as required. If not, call an electrician and plumber to arrange the utilities as necessary. B B A Use the plastic wedges provided with the product to provide sufficient space for air circulation between the product and the wall. 1.
Installation 3.3. Adjusting the stands If the product is not in balanced position, adjust the front adjustable stands by rotating right or left. 3.4. Power connection A B C WARNING: Do not use extension or multi sockets in power connection. 3.5. Water connection (Optional) A WARNING: Unplug the product and the water pump (if available) during connection. The product’s water mains, filter and carboy connections must be rendered by authorized service.
Installation 3.6. Connecting water hose to the product 3.7. Connecting to water mains To connect the water hose to the product, follow the instructions below. 1. Remove the connector on the hose nozzle adaptor in the back of the product and run the hose through the connector. (Optional) To use the product by connecting to the cold water mains, a standard 1/2” valve connector must be installed to the cold water mains in your home.
Installation 4. Attach the connector into the faucet adaptor and tighten by hand / tool. 2. Connect the other end of the water hose to the water pump by pushing the hose into the pump’s hose inlet. 5. To avoid damaging, shifting or accidentally disconnecting the hose, use the clips provided to fix the water hose appropriately. A WARNING:After turning the faucet on, make sure there is no water leak on either end of the water hose.
Installation 3.9.1. Fixing external filter on the wall (Optional) A 2. Determine the location to fix the external filter. Fix the filter’s connecting apparatus (5) on the wall. WARNING: Do not fix the filter on the product. Check to see the following parts are supplied with your product’s model: 5 4 6 1 2 3. Attach the filter in upright position on the filter connecting apparatus, as indicated on the label. ( 6 ). 3 1. Connector (1 piece): Used to attach the water hose to the rear of the product.
Installation 3.9.2. Internal filter The internal filter provided with the product is not installed upon delivery; please follow the instructions below to install the filter. 1. “Ice Off ” indicator must be active while installing the filter. Switch the ON-OFF indicator using the “Ice” button on the screen. After the connection is established, it should look like the figure below. Water line: Carboy line: 2. Remove the vegetable bin (a) to access the water filter.
Installation 3. Remove the water filter by-pass cover by pulling. C A few drops of water may flow out after removing the cover; this is normal. 4. Place the water filter cover into the mechanism and push to lock in place. 5. Push the “Ice” button on the screen again to cancel the “Ice Off ” mode. C C The water filter will clear certain foreign particles in the water. It will not clear the microorganisms in the water. The filter replacement period of your product is 6 months.
4 Preparation 4.1. What to do for energy saving A Prevent direct contact between the temperature sensor in the freezer compartment and the food packages. Energy consumption may increase in case of a contact with the sensor. Connecting the product to electronic energy-saving systems is harmful, as it may damage the product. For a freestanding appliance; ‘this refrigerating appliance is not intended to be used as a builtin appliance’. Do not keep the refrigerator doors open for long periods.
5 Using the product 5.1. Indicator panel Indicator panels may vary depending on the model of your product. Audio and visual functions of the indicator panel will assist in using the refrigerator. 8 1 2 3 7 6 5 9 4 1. Cooler compartment indicator 2. Error status indicator 3. Temperature indicator 4. Vacation function button 5. Temperature adjustment button 6. Compartment selection button 7. Freezer compartment indicator 8. Economy mode indicator 9.
Using the product 1. Cooler compartment indicator The cooler compartment light will turn on when adjusting the cooler compartment temperature. 2. Error status indicator This sensor will activate if the refrigerator is not cooling adequately or in case of sensor fault. When this indicator is active, the freezer compartment temperature indicator will display "E" and the cooler compartment temperature indicator will display "1, 2, 3..." etc. numbers.
Using the product Indicator panel This touch-control indicator panel allows you to set the temperature without opening the door of your refrigerator. Just touch the relevant button with your finger to set the temperature.
Using the product 1. Economic use This sign will light up when the freezer compartment is set to -18°C', the most economical setting. ( ) Economic use indicator will turn off when rapid cooling or rapid freezing function is selected. vacation mode indicator ( ). When the Vacation function is active, the cooler compartment temperature indicator displays the inscription "- -" and no cooling process will be active in the cooling compartment.
Using the product 9. Eco-fuzzy To activate the eco-fuzzy function, press and hold the eco-fuzzy button for 1 second. When this function is active, the freezer will switch to the economic mode after at least 6 hours and the economic use indicator will light up. To deactivate the ( ) eco-fuzzy function, press and hold the ecofuzzy function button for 3 seconds. The indicator will light up after 6 hours when the eco-fuzzy function is active. 10.
Using the product 1. 2. 34. 5. 6. 7. 8. 9. 10. 11. 12. C Freezer compartment temperature setting Economy mode Energy saving function (display off) Error status Cooler compartment temperature setting Rapid cooling Vacation function Keypad lock / filter replacing alert cancellation Ice making on/off Display on/off /Alarm off Autoeco Rapid freezing *Optional: The figures in this user guide are intended as drafts and may not perfectly match your product.
Using the product 1. Freezer compartment temperature setting Pressing the button ( ) will enable the freezer compartment temperature to be set at -18,-19,20,-21 ,-22,-23,-24,-18... 2. Economy mode Indicates the refrigerator is running on energysaving mode. This indicator will be active when the freezer compartment temperature is set at -18 or the energy-saving cooling is engaged by ecoextra function. ( ) 3.
Using the product The indicator will light up after 6 hours when the auto eco function is active. ( ) 5.5. Description and cleaning of odour filter 12. Rapid freezing Press the button ( ) for rapid freezing. Press the button again to deactivate the function. (Optional) Odor filter prevents unpleasant odour build-up in your product. 1. Pull the cover into which the odour filter is installed downwards from the front section and remove as illustrated. 2. Leave the filter under sunlight for one day.
Using the product 5.6. Telescopic drawer 5.7. Ionizer Pay attention not to squeeze any parts of your body such as hands, feet and etc. between the movable parts while the drawer is in use in order to avoid any injury. You can remove the partition in the drawer as illustrated when you want to clean it. You can remove the drawers only for cleaning. It is not possible to group the drawers in their places after loading them with food when they are removed.
Using the product 5.10.Movable middle section 5.11.Ice container (Optional) Ice container allows you to obtain ice from the product easily. Movable middle section is intended to prevent the cold air inside your refrigerator from escaping outside. Using the ice container Sealing is provided when the gaskets on the door 1. Remove the ice container from the freezer presses on the surface of the movable middle compartment. section while the cooler compartment doors are 2. Fill the ice container with water.
Using the product 5.13.Freezing fresh food Mark each food pack by writing the date on the package before freezing. This will allow you to determine the freshness of each pack every time the freezer is opened. Keep the earlier food items in the front to ensure they are used first. Frozen food items must be used immediately after defrosting and should not be frozen again. Do not froze large quantities of food at once.
Using the product Boil the vegetables and filter the water to extend the frozen storage time. Place the food in air-tight packages after filtering and place in the freezer. Bananas, tomatoes, lettuce, celery, boiled eggs, potatoes and similar food items should not be frozen. When these foods are frozen, only their nutritional value and taste shall be affected negatively. They shall not be spoiled so that they would create a risk for human health. 5.16.
6 Maintenance and cleaning 6.1. Preventing malodour Cleaning the product regularly will prolong its service life. B WARNING: Disconnect the power before cleaning the refrigerator. Do not use sharp and abrasive tools, soap, house cleaning materials, detergents, gas, gasoline, varnish and similar substances for cleaning. Melt a teaspoonful of carbonate in the water. Moisten a piece of cloth in the water and wring out. Wipe the device with this cloth and dry off thoroughly.
7 Troubleshooting Check this list before contacting the service. Doing so will save you time and money. This list includes frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned herein may not apply to your product. The refrigerator is not working. The power plug is not fully settled. >>> Plug it in to settle completely into the socket. The fuse connected to the socket powering the product or the main fuse is blown. >>> Check the fuses.
Troubleshooting The new product may be larger than the previous one. Larger products will run for longer periods. The room temperature may be high. >>> The product will normally run for long periods in higher room temperature. The product may have been recently plugged in or a new food item is placed inside. >>> The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside. This is normal.
Troubleshooting The ground is not level or durable. >>> If the product is shaking when moved slowly, adjust the stands to balance the product. Also make sure the ground is sufficiently durable to bear the product. Any items placed on the product may cause noise. >>> Remove any items placed on the product. The product is making noise of liquid flowing, spraying etc. The product’s operating principles involve liquid and gas flows. >>> This is normal and not a malfunction.
