User manual
38
The User menu enables the user to customise at will both the audio (tone and
volume) and visual signals sent by the hob.
Press .
Press again within 3 seconds.
- The symbol will appear.
- Continuing to hold , press the 4 Digits for the cooking areas ( ) one at a time in a
clockwise direction, starting from the one on the left.
A beep sounds each time you press, and when button is released it shows:
The Digit for the left rear cooking area alternately displays and a number from 2 to 7
indicating the Menu Code (See table below).
The Digit for the left front cooking area shows a number that depends on the values
indicated in the selection (See table below).
Press the Digit for the left rear cooking area and a number from 2 to 7 on the power bar to
access the settings menu (See table below).
Once the correct value has been entered, conrm by pressing and holding until
conrmation is received.
Menu Code Description Value
U2
Menu to manage the button
sounds volume.
0 - 1 - 2 - 3
U3
Menu to manage the alarm
signal sounds volume.
0 - 1 - 2 - 3
U4
Menu to manage the display
lighting level.
Max. 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 Min.
U5
Menu to manage the countdown
animation.
0 - 1
U6
Pan recognition function always
active menu.
0 - 1
U7
Menu to manage the end of
countdown buzzer.
0 - 1 - 2
7.5 User Menu (custom settings)