User manual

29
can result in warping and
detachment.
The kitchen cabinet must
allow sufficient room for the
electrical connections of
the appliance. Suspended
kitchen cabinets above the
appliance must be installed
at a distance that provides
enough room for comfortable
working process.
The use of hard wood
decorative borders around
the worktop behind the
appliance is allowed, in this
case the minimum distance
remains as indicated on the
installation illustrations.
The minimum distance
between the built-in
appliance and rear wall is
indicated at the illustration
for the installation of the
built-in appliance (150 mm
for the side wall, 40 mm
for the rear and 500 mm
minimum for any cabinets
above it).
To prevent leakage of liquid
between the edge of the hob
and the countertop, place
the adhesive seal provided
along the entire outer edge of
the hob before assembly.
Proper use
The extractor appliance has
been designed exclusively
for domestic use to eliminate
kitchen smells.
Never use the appliance
for purposes other than for
which it has been designed.
Deep fat fryers must be
continuously monitored
during use: overheated oil
can burst.
Do not operate the appliance
with an external time switch
or a separate remote control
system.
The appliance shall not be
installed behind a decorative
door in order to avoid
overheating.
To avoid damaging the
appliance do not climb onto
the appliance.
To avoid damaging the silicon
grouting, do not put hot
cookware on the frame.
Do not cut or prepare food
on the surface or drop hard
objects onto it. Do not drag
cookware across the surface.