User manual
33
Display elements and buttons for extractor fan control panel
Extractor fan selection
Increase / Decrease extraction speed (power)
Activation / Deactivation of automatic function (by default automatic mode is
active).
When the selection bar of the cooker hood is touched (pressed), the automat-
ic mode deactivates and works with the extractor fan in manual mode.
To re - activate the automatic mode press button and the led will light
up to indicate that the hood is working in this mode.
By default the hood is in ducted mode.
Activate charcoal filter
– Press for 5 sec the button on the hood the first time that it is switched
on .
Since that time lit icon will show when it is necessary to perform
maintenance of the charcoal (odour) filter .
The grease cleaning filter notification through led is always enabled.
Resetting activated carbon odour filter saturation
After performing maintenance on the filters:
– Press and hold 5sec the button
The grease led will turn off, and the indicator countdown will start again.
– Press and hold 5sec the button
The odour led will turn off, and the indicator countdown will start again.
Set the speed INTENSIVE1
This speed is timed to run for 10min. At the end of this time, the system
returns automatically to the speed that was set before.
Set the speed INTENSIVE2
This speed is timed to run for 5min. At the end of this time, the system
returns automatically to the speed that was set before.