Instruction manual

EN
Instructions for use
10
7 minutes, after which it
automatically reverts to speed 3.
Touch the same button to disable the
function . The icon flashes while
the boost function is active and it will
not be possible to activate the
delayed switch off function.
DELAYED SWITCH OFF FUNCTION
Automatic switch off can be delayed
by 10 minutes at any set speed,
except when BOOST mode is
enabled. When the button is
touched to activate the function, the
icon lights up more brightly. To
disable the function, touch the
symbol again.
LIGHT ON / OFF / ADJUSTMENT.
Briefly touching the icon turns
the light on or off. Keeping this
symbol pressed for more than 1
second varies the brightness of the
light continuously from minimum to
maximum, until it is released. When
the button is released, the level of
brightness will be saved to memory,
and used each time the hood is
switched on.
Tapping the symbol twice quickly
when the light is off will set it to
maximum brightness.
“Tunable White” function.
Touching the , and symbols
at the same time activates the
"Tunable White” function, i.e. setting
of the light colour temperature. The
light colour temperature changes
from cold to warm and vice versa until
the two buttons are released; the
selection will be saved to memory and
used each time the hood is switched
on.
24h FUNCTION.
Allows the air to be changed by
activating the extractor fan at speed 1
for 10 minutes every hour. When the
hood is in Stand-by mode (all buttons
dimly lit), touching the symbol to
activate the function will cause the
relative icon to light up. The function
is automatically deactivated after 24
hours of operation. You can also
disable it by touching the icon again.
When the extractor fan is in
operation, the speed icon will
also be lit.