User manual

EN-8
Description / Use
3 Use
3.1 Before first use
1) Remove any stickers from the kettle and
clean the outside with a damp cloth.
2) Remove the scale filter behind the spout
(Fig. B) and wash it under running
water.
3) Put the filter back in the correct position
(Fig. C).
4) Remove the kettle from its base (Fig. D),
press the button to open the lid (Fig. E)
and fill it to the maximum level (5 - Fig.
A).
5) Close the lid, place the kettle on its
base (Fig. F) and push the lever down
to turn it on (Fig. G).
6) Wait for the water to boil, then empty
the kettle, disposing of the boiling water
safely. Repeat this at least three times.
3.2 Operation
If necessary, wind the cord under the base
(7 and 8 - Fig. A).
Always use the handle (4 - Fig. A) to lift the
kettle and pour out the water.
1) Remove the kettle from the base (Fig.
D), press the button to open the lid (Fig.
E) and fill with water, using the level
indicator (5 - Fig. A) as a reference.
Avoid filling it with too much or too little
water as indicated by the maximum or
minimum level indicators.
2) Close the lid and put the kettle back on
its base (Fig. F).
3) Then insert the plug into the power
socket.
4) Push the lever downwards to switch
the kettle on. The LED lights up and
becomes white (Fig. G).
5) When the water boils, the lever
automatically moves into the OFF
position and the LED switches off. Pour
out the water.
2 Product description
(Fig. A)
1) Anti-drip spout
2) Scale filter
3) Lid with push-push opening
4) Handle
5) Water level indicator
6) ON/OFF lever with indicator light
7) 360 degree cordless base
8) Cable storage (under base)
To avoid damaging the
appliance, the kettle is equipped
with a safety device that
automatically turns the lever to
the OFF position if the kettle is
accidentally switched on without
water.
If this occurs, let the kettle cool
down before refilling.