EN Washing Machine / User Manual LB2T92ES
Thank you for choosing this product. This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
CONTENTS 1.SAFETY INSTRUCTIONS................................................................................................ .1 1.1 General Safety Warnings................................................................................................2 1.2 During Use ....................................................................................................................7 1.3 Packaging and Environment...........................................................................................8 1.
1. SAFETY INSTRUCTIONS Operating voltage / frequency (220-240) V~/50Hz Total current (A) 10 Water pressure (Mpa) Maximum 1 Mpa / Minimum 0. 1Mpa 2200 Total power (W) Maximum washing capacity (dry laundry) (kg) 9 • Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base.
NOTE: For a softcopy of this user manual, please contact the following address: www.smeg. com/info/download-manuals Read this user manual carefully. Your machine is for domestic use only. Using it for commercial purposes will cause your warranty to be cancelled. This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. For this reason, it is important to pay particular attention to any figures whilst reading the operating manual. 1.
• Unplug your Washing Machine and switch off the water supply if the Washing Machine is left unused for a long time. We also recommend that you leave the door open to prevent build up of humidity inside the Washing Machine. • Some water may be left in your Washing Machine as a result of quality checks during production. This will not affect the operation of your Washing Machine. • The packaging of the machine could be hazardous to children.
similar products that you intend to use in your Washing Machine. • Make sure that the door of your Washing Machine is not restricted and can be opened fully. Install your machine in a location that can be fully ventilated and preferably has constant air circulation. Door emergency opening function When the machine is running, any power cut or when the program is not yet complete, the door will remain locked. To open the door; 1. Please turn off the machine.
CURRENT • Do not connect your Washing Machine to the mains electricity supply using an extension lead. • Do not insert a damaged plug into a socket. • Never remove the plug from the socket by pulling the cord. Always hold the plug. • Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. • Do not touch your Washing Machine if your hands or feet are wet. • A damaged power cord/plug can cause fire or give you an electric shock.
• Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters and coins. Risk of fire and explosion Risk of falling and injury • Do not climb on your Washing Machine. • Make sure hoses and cables do not cause a trip hazard. • Do not turn your Washing Machine upside down or on its side. • Do not lift your Washing Machine using the door or detergent drawer. The machine must be carried by at least 2 people.
• • • • • • before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void.
depending on the product purchased. 1.3 Packaging and Environment Removal of packaging materials Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable. Use of recycled material reduces raw material consumption and decreases waste production. 1.
2. TECHNICAL SPECIFICATIONS 3 2 1 2.2 Technical Specifications 4 Operating voltage / frequency (V/Hz) (220-240) V~/50Hz 5 Total current (A) 10 Water pressure (Mpa) Maximum: 1 Mpa Minimum : 0.1 Mpa Total power (W) 2200 6 7 8 9 10 2.1 General Appearance 1. Electronic Display 2. Programme Dial 3. Upper Tray 4. Detergent Drawer 5. Drum 6. Pump Filter Cover 7. Water Inlet Valve 8. Power Cable 9. Discharging Hose 10.
3. INSTALLATION 3.2 Adjusting the Feet / Adjusting Adjustable Stays 3.1 Removing the Transit Bolts X4 X4 1 1 2 1. Do not install your machine on a surface (such as carpet) that would prevent ventilation at the base. • To ensure silent and vibration-free operation of your machine, install it on a firm surface. X4 3 4 1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine.
The mains cord of your washing machine is equipped with an earthed plug. This plug should always be inserted to an earthed socket of 10 amps. • • If you do not have a suitable socket and fuse conforming with this, please ensure the work is carried out by a qualified electrician. • We do not take responsibility for damage that occurs due to the use of ungrounded equipment.
3.5 Water Discharge Connection 4.1 Detergent Drawer • Connect the water drain hose to a standpipe or to the outlet elbow of a household sink, using additional equipment. • Never attempt to extend the water drain hose. • Do not put the water drain hose from your machine into a container, bucket or bathtub. • Make sure that the water drain hose is not bent, buckled, crushed or extended. • The water drain hose must be installed at a maximum height of 100 cm from the ground. 1 2 3 4 4.
4.2 Sections Main wash detergent compartment: 4.3 Program Dial This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate will be supplied inside your machine. (*) Fabric conditioner, starch, detergent compartment: • To select the desired programme, turn the programme dial either clockwise or anti-clockwise until the marker on the programme dial points to the chosen programme. • Make sure that the programme dial is set exactly to the programme you want.
5. USING YOUR WASHING MACHINE curtains or place them in a washing net or bag. 6. Reverse textiles such as pants, knitwear, t-shirts and sweat shirts. 7. Wash socks, handkerchiefs and other small items in a washing net. 5.1 Preparing Your Laundry 1 3 5 2 4 Can be bleached Do not bleach Normal washing Maximum ironing temperature 150°C Maximum ironing temperature 200°C Do not iron Can be dry cleaned No dry cleaning Dry flat Drip dry Hang to dry Do not tumble dry F P A 6 7 1.
weights of typical laundry items: LAUNDRY TYPE WEIGHT (gr) Towel 200 Linen 500 Bathrobe 1200 Quilt cover 700 Pillow slip 200 Underwear 100 Tablecloth 250 of the detergent drawer. Do not exceed the MAX level. • Thick softeners may cause clogging of the drawer and should be diluted. • It is possible to use fluid detergents in all programmes without a pre-wash. To do this, slide the fluid detergent level plate (*) into the guides in compartment II of the detergent drawer.
5.7 Additional Functions 1. Temperature Selection Use the washing water temperature adjustment button to alter the automatically programmed washing water temperature. When you select a programme the maximum temperature for that programme is automatically selected. To adjust the temperature, press the water temperature adjustment button until the desired temperature is displayed on the digital display.
7. Extra Rinse(*) 4. Anti- Allergic(*) Auxiliary function button 3 or 4 Extra Rinse Auxiliary function button 3 or 4 Anti- Allergic You can add an additional rinse operation to your laundry using this additional function. Your machine will carry out all rinsing steps with hot water. We recommend this setting for laundry worn on delicate skin, baby clothes and underwear. To select this function, press the Antiallergic symbol is displayed. button when the 5.
9. No Spin(*) Auxiliary function button 3 or 4 No Spin If you don’t want to perform wringing on your laundry, you can use this auxiliary function. You may make the programme active by pressing the wringing cancel button on the display panel when the led light of the symbol turns on. 10. Cold Wash(*) Auxiliary function button 3 or 4 Cold Wash You can use this auxiliary function when you want to wash your laundry with cold water (tap water).
5.10 Programme End Your machine will stop by itself as soon as the programme you have selected finishes. • “” will flash on the electronic display. • You can open the machine’s door and remove the laundry. • Leave the door of your machine open to allow the inner part of your machine to dry. • Switch the programme dial to STOP position. • Unplug your machine. • Turn the water tap off.
Programme Washing temperature (°C) Maximum dry laundry amount (kg) Detergent compartment Programme duration (Min.) 6. PROGRAMME TABLE Laundry type / Descriptions Algodón *60-90-80-70-40 9,0 2 240 Very dirty, cotton and flax textiles. (Underwear, linen, tablecloth, towel (maximum 4,5 kg), bedclothes, etc.) Eco 40-60 *40 - 60 9,0 2 228 Dirty cotton and flax textiles. (Underwear, linen, tablecloth, towel (maximum 4,5 kg), bedclothes, etc.
NOTE: PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS. (*) Washing water temperature of the programme is the factory default. (***) If your machine has the rapid wash auxiliary function, you can enable the quick wash option on the display panel and load the machine with 2 kg or less laundry to wash it in 30 minutes. (**) Due to the short washing time of this programme, we recommend that less detergent is used.
The Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle, and that this programme is used to assess the compiance with the EU ecodesign legislation.The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
6.1 Important Informations • Use detergents, softeners and other additives suitable for automatic washing machines only. Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. • We recommend that periodic cleaning for washing machine every 2 months. For periodic cleaning please use Drum Clean programme. If your machine do not have Drum Clean programme, use Cottons-90 programme.
7. CLEANING AND MAINTENANCE 7.2 Water Inlet Filters Water inlet filters prevent dirt and foreign materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive sufficient water, although your water supply is on and the tap is open. We recommend that you clean your water inlet filters every 2 months. 7.1 Warning Turn your mains power supply off and remove the plug from the socket before carrying out maintenance and cleaning of your machine.
7.3 Pump Filter 5. When closing the pump cover, ensure that the mountings inside the cover meet the holes on the front panel side. 6. Close the filter cover. 1 2 WARNING: The water in the pump may be hot, wait until it has cooled down before carrying out any cleaning or maintenance. (*) Specifications may vary depending on the machine purchased. 3 4 5 6 The pump filter system in your Washing Machine prolongs the life of the pump by preventing lint from entering your machine.
disassemble the flush stopper. Clean thoroughly to completely remove any softener residue. Refit the flush stopper after cleaning and check that it is seated properly. 8. Body / Drum 1 • Rinse with a brush and lots of water. • Collect the residues inside the detergent drawer slot so that they don’t fall inside your machine. • Dry the detergent drawer with a towel or dry cloth and place it back 2 1. Body Use a mild, non-abrasive cleaning agent, or soap and water, to clean the external casing.
9. TROUBLESHOOTING Repair of your machine should be carried out by an authorised service company. If your machine requires repair or if you cannot solve an issue with the information provided below, then you should: • Unplug your machine from the mains power supply. • Turn off the water supply. FAULT Your machine does not start. Your machine does not intake water. Your machine does not discharge water. Your machine vibrates. Excessive foam is formed in the detergent drawer.
FAULT POSSIBLE CAUSE TROUBLESHOOTING Hard water. Increase the amount of detergent following the manufacturer’s instructions. Your laundry is too tightly packed together in the drum. Check that your laundry is spread out. As soon as the machine is loaded with water, water discharges. The end of water drain hose is too low for the machine. Check that the drain hose is at a suitable height. (**) . No water appears in the drum during washing. No fault. Water is in the unseen part of the drum. ......
................................................................................................................................................. ................................................................................................................................................. ................................................................................................................................................. ..........................................................................
The minimum period which must supply the spare parts for the household washing machine is 10 years. CUSTOMER CARE AND SERVICE Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, Serial Number and Service Index (SI). The information can be found on the rating plate. Subject to change without notice.
