Instruction manual

Istruzioni per l’utente
31
ADJUSTING THE RINSE AID DISPENSER MODE
The dishwasher must be switched on and the door closed.
 Press and hold the program selection button (7),
 after approximately 15 seconds the salt light flashes,
 press and hold the program selection button (7) until the rinse aid
indicator light flashes.
 The program indicator lights (6) will indicate the current setting.
 Each press of the program selection button (7) modifies the setting
according to the following table.
>
After carrying out the adjustment or displaying the current setting, if you
do not touch the button for a few seconds the dishwasher will
automatically exit from adjustment mode and return to the standard
operating mode.
RINSE AID ADJUSTMENT TABLE
0 – not
dispensed
b0
All indicator lights off
minimum 2 ml
b1
One indicator light on
3 ml
b2
Two indicator lights on
4ml
b3
Three indicator lights on
5ml
b4
Four indicator lights on
maximum 6 ml
b5
Five indicator lights on
Default settings:
b4
-
5 ml
 The amount of rinse aid must be increased if the washed dishes
appear dull or feature circular stains.
 If, on the other hand, the dishes are sticky or have white streaks, it is
necessary to reduce the rinse aid setting.