Operation Manual

Instructions for the User
12
EN
7.3.1 Setting the current time
Press PT 1 for 3 seconds to set the current time, turn PT1 to the right and
left to increase or decrease the hours. Press it once to move on to setting
the minutes. Turn it the right and left to increase or decrease the hours
and press it to set the current time. The symbol will appear on the
display, which will stop flashing. Press PT1 again and the minutes will
Flash, turn right left to set the minutes. Press PT and the time is set.
7.3.2 Setting the current time
It might become necessary to change the current time, for example at the
switch from summer to winter time. To do this, start from the standby
setting (see point “7.2 Operating settings”). Now repeat the operations
described in point “7.3.1 Setting the current time”.