Instruction manual

Installation
53
EN
3. Remove the flame-spreader crowns.
4. To remove the UR burner (depending on
the model), as well as removing the
burner caps (1), the pan supports (2)
and the flame-spreader crowns (3), also
remove the lower plate (4).
5. Unscrew and remove the burner rings
using the key provided.
When reinstalling the hob,
remember that the rings should be
tightened as far as possible, using
the key provided.
If the rings are not tightened
completely, the flame interruption
zones on the crowns will not be
aligned with the spokes of the pan
supports.