GEBRAUCHSANWEISUNG LEITFADEN ZUM GEBRAUCH DES GESCHIRRSPÜLERS UND ZU DEN SPÜLPROGRAMMEN
Inhaltsverzeichnis 1. 2. 3. 4. Beschreibung der Bedieneinrichtungen ______________________ 2 Gebrauchsanleitung ____________________________________ 15 Reinigung und Pflege ___________________________________ 28 Abhilfe bei Fehlfunktionen _______________________________ 32 Wir danken Ihnen, dass Sie sich für eines unserer Geräte entschieden haben.
Anleitung für den Benutzer 1. Beschreibung der Bedieneinrichtungen 1.1 Die Bedienblende Alle Bedien- und Anzeigeeinrichtungen des Geschirrspülers befinden sich auf der Frontbedienblende.
Anleitung für den Benutzer 1.2 Das Info-Display Der Geschirrspüler verfügt über ein praktisches DISPLAY, auf dem alle Informationen zu den programmierten Funktionen angezeigt werden. A 4-stelliges DISPLAY B KONTROLLLAMPE KLARSPÜLER FEHLT C KONTROLLLAMPE SALZ FEHLT D KONTROLLLAMPE START/PAUSE E KONTROLLLAMPEN OPTIONEN PROGRAMMTABELLE Die Bedienungsanleitung enthält die Programmtabelle für verschiedene Modelle.
Anleitung für den Benutzer PROGRAMMTABELLE PROGRAMM NUMMER UND SYMBOL 1 EINWEICHEN 2 KRISTALL- ART UND GRAD DER VERSCHMUTZUNG Töpfe und Geschirr, die später gespült werden sollen. DAUER PROGRAMMABLAUF VERBRAUCH MINUTEN (1) WASSER LITER ENERGIE KWh (1) Kaltvorspülen 15 3,5 0,02 GLAS Leicht verschmutztes Kristallglas, Porzellan und gemischtes Geschirr.
Anleitung für den Benutzer QUICK TIME PROGRAMME (Lesen Sie den Abschnitt mit den Erläuterungen zur Funktionsweise) PROGRAMM NUMMER UND SYMBOL 6 SCHNELL 27’ + 7 ÖKO KURZ + 8 NORMAL KURZ + DAUER ART UND GRAD DER VERSCHMUTZUNG PROGRAMMABLAUF Wenig verschmutztes Geschirr, das unmittelbar nach dem Gebrauch gespült wird VERBRAUCH MINUTEN (1) WASSER LITER ENERGIE KWh (1) Reinigen bei 38°C Klarspülen bei 50°C 27 6,5 0,70 Wenig verschmutztes empfindliches Geschirr, das unmittelbar nach dem Gebrauch g
Anleitung für den Benutzer ANMERKUNGEN UND GRUNDLAGEN Das Einweichen nur bei Teilbeladung ausführen. Die Optionen können nicht in Verbindung mit dem Programm EINWEICHEN verwendet werden. Die Option ENERSAVE kann nicht mit den Programmen Einweichen, Ultra Clean und allgemein mit allen den Programmen verwendet werden, bei denen nicht die abschließende Trockenphase vorgesehen ist. Standardprogramm nach der Norm EN 50242. Muss die Option ENERSAVE * gewählt werden.
Anleitung für den Benutzer 1.3 Spülprogramme Der Geschirrspüler verfügt über eine Bedienblende und ein INFODISPLAY beschrieben werden. Mit diesen Bedieneinrichtungen können alle Bedienungen zum Ein- und Ausschalten und zum Programmieren vorgenommen werden.
Anleitung für den Benutzer PROGRAMMSTART An diesem Punkt reicht es für den Start Maschine aus, die Taste START/PAUSE zu drücken. Einige Sekunden lang warten, bis die Schrift „Time to end“ zu blinken beginnt und man ein Beep als Bestätigung hört. Von diesem Moment an beginnt die Zyklusdauer auf dem DISPLAY sich zu verringern. Diese Zeit, die sich während des Zyklus verändert, ist „richtungsweisend“, da sie durch die Waschbedingungen wie Menge und Geschirrart, Eingangstemperatur des Wasser usw.
Anleitung für den Benutzer ANNULLIERUNG EINES PROGRAMMS Zum Annullieren eines laufenden Programms verfahren Sie wie folgt: • Unterbrechen Sie das Programm (siehe „UNTERBRECHUNG EINES PROGRAMMS“); • Halten Sie die Taste START/PAUSE gedrückt; auf dem Display erscheint dann die Anzeige „P0“ und der Geschirrspüler schaltet automatisch auf Programmende; das Wasser wird aus dem Spülbehälter abgepumpt (während dieses Vorgangs blinkt das Symbol START/PAUSE (D)).
Anleitung für den Benutzer STARTVERZÖGERUNG Mit der Taste PROGRAMMVERZÖGERUNG können Sie je nach Modell den Start des Spülprogramms um 1 bis 12/24 Stunden verzögern. Mit dieser Option können Sie den Geschirrspüler arbeiten lassen, wann es Ihnen am liebsten ist. Wenn Sie die Taste PROGRAMMVERZÖGERUNG zum ersten Mal drücken, leuchtet die Kontrolllampe Option auf und auf dem DISPLAY erscheint die Anzeige 1:h. Durch mehrmaliges erneutes Drücken (2:h, 3:h usw.) können Sie die gewünschte Verzögerung einstellen.
Anleitung für den Benutzer OPTIONEN (verfügbar bei allen Programmen mit Ausnahme des Einweichprogramms) Die Optionen werden mit der Taste OPTIONENWAHL aktiviert. Drücken Sie die Taste, um die Funktion zu aktivieren. Die Aktivierung wird durch das Blinken einer der Kontrolllampen OPTIONEN (E) signalisiert. ANMERKUNG: Die Kontrolllampe PROGRAMMVERZÖGERUNG leuchtet nur auf, wenn man die Taste PROGRAMMVERZÖGERUNG drückt. Drücken Sie die Taste OPTIONENWAHL erneut, um die nächste Option anzuzeigen.
Anleitung für den Benutzer ENERSAVE Wenn Sie diese Option zusammen mit dem gewünschten Spülprogramm aktivieren, können Sie den Energieverbrauch um ein Weiteres senken. Denn das Trocknen wird durch eine spezielle Vorrichtung begünstigt, welche die Gerätetür automatisch entriegelt und langsam um einige Zentimeter öffnet. Hierdurch wird das Geschirr perfekt getrocknet.
Anleitung für den Benutzer WICHTIG: Wenn die Option nicht mehr gebraucht wird, muss man sie mit der zugehörigen Taste deaktivieren (die Kontrolllampe erlischt dann). Wenn die Wasserhärte auf einen Wert über H3 eingestellt ist und die Option „Flexi Tabs“ aktiviert wird, blinkt die zugehörige Kontrolllampe, um zu signalisieren, dass eine falsche Einstellung vorgenommen wurde.
Anleitung für den Benutzer ENERGIEMANAGEMENT Nach 5 Minuten Inaktivität (Spülprogramm beendet, unterbrochen bzw. eingestellt, aber nicht gestartet) wird der Geschirrspüler in den StandbyZustand geschaltet, um den Energieverbrauch zu senken. In diesem Zustand erfolgen die Anzeigen des Geschirrspülers (je nach Modell Kontrolllampen oder Display) langsamer (1 Einschaltung alle 5 Sekunden).
Anleitung für den Benutzer 2. Gebrauchsanleitung Nach der ordnungsgemäßen Installation des Geschirrspülers für die Inbetriebnahme wie folgt vorgehen: • • • 2.1 Den Wasserenthärter einstellen; Regeneriersalz einfüllen; Klarspüler und Reiniger einfüllen. Gebrauch des Wasserenthärters Der im Wasser enthaltene Kalk (Wasserhärte) ist verantwortlich für weißliche Flecken auf dem trockenen Geschirr, das mit der Zeit matt zu werden neigt.
Anleitung für den Benutzer • Kein Speisesalz verwenden, da es nichtlösliche Substanzen enthält, die im Laufe der Zeit die Enthärtungsanlage beschädigen können. • Nötigenfalls das Salz vor dem Start des Spülprogramms einfüllen; auf diese Weise wird eventuell übergelaufene Salzlösung sofort mit dem Wasser weggespült; bleibt die Salzlösung längere Zeit im Spülraum, kann es zu Korrosion kommen.
Anleitung für den Benutzer WASSERHÄRTE-TABELLE WASSERHÄRTE Grad Deutsche Härte Grad Französische Härte (°dH) (°dF) EINSTELLUNG 0-4 0-7 H1 KEIN SALZ 5 - 15 8 - 25 H1 16 - 23 26 - 40 H2 24 - 31 41 - 60 H3 32 - 47 61 - 80 H4 48 - 58 81 - 100 H5 Die örtliche Wasserhärte beim Wasserversorgungsunternehmen erfragen. Am Ende der Einstellung bzw.
Anleitung für den Benutzer EINFÜLLEN DES KLARSPÜLERS FÜR DAS NACHSPÜLEN Der Klarspüler beschleunigt das Trocknen des Geschirrs und verhindert die Bildung von Flecken und Kalkablagerungen. Er wird während des letzten Nachspülens automatisch aus dem Behälter, der sich in der Innentür befindet, dem Wasser zugegeben. Zum Hinzufügen des Klarspülers: • Die Gerätetür öffnen. • Den Deckel des Behälters um ¼ Umdrehung entgegen Uhrzeigersinn drehen und herausnehmen.
Anleitung für den Benutzer EINFÜLLEN DES REINIGERS Zum Öffnen der Reiniger-Verteilerkammer leicht auf die Taste P drücken. Den Reiniger einfüllen und den Deckel sorgfältig wieder schließen. Die Verteilerkammer öffnet sich während des Reinigens automatisch. • • • • • • Wenn Sie ein Programm mit Vorspülen mit Warmwasser wählen (siehe die Programmtabelle), müssen Sie zusätzlich Spülmittel in das Fach G/H (je nach Modell) geben. Ausschließlich Spezialreinigungsmittel für Geschirrspüler verwenden.
Anleitung für den Benutzer Füllt man Reiniger - auch Flüssigreiniger - in den Klarspülerbehälter, nimmt der Geschirrspüler Schaden. 2.3 Sicherheitshinweise und allgemeine Ratschläge Bevor man den Geschirrspüler zum ersten Mal benutzt, sollte man die nachstehenden Empfehlungen in Hinblick auf die Art des zu spülenden Geschirrs und dessen Anordnung lesen.
Anleitung für den Benutzer ACHTUNG ! • • • • • Sicherstellen, dass das Geschirr stabil eingeordnet ist, nicht kippen kann und nicht die Bewegung der Sprüharme während des Betriebs behindert. Keine zu kleinen Gegenstände in die Geschirrkörbe geben; sie könnten herabfallen und die Sprüharme oder die Umwälzpumpe blockieren. Gefäße wie Tassen, Schüsseln, Gläser und Töpfe müssen stets mit der Öffnung nach unten eingeordnet werden, damit das Wasser ablaufen kann.
Anleitung für den Benutzer 2.4 Gebrauch der Geschirrkörbe Der Geschirrspüler hat ein Fassungsvermögen von 13 Maßgedecken einschließlich des Serviergeschirrs. UNTERKORB Der Unterkorb ist aufgrund der besonders intensiven Reinigungswirkung des unteren Sprüharms für das „schwierigste“ und am stärksten verschmutzte Geschirr geeignet.
Anleitung für den Benutzer BELADEN DES UNTERKORBS Flache Teller, tiefe Teller, Dessertteller und Servierteller senkrecht einordnen. Töpfe, Pfannen und deren Deckel müssen mit der Öffnung nach unten eingeordnet werden. Ordnen Sie Suppen- und Dessertteller so ein, dass zwischen zwei Tellern stets ein Freiraum bleibt.
Anleitung für den Benutzer BESTECKKORB Der Korb verfügt über herausnehmbare Besteckhalter, in die man die Besteckteile mit einem hinreichenden Abstand einsetzen muss, um die optimale Wasserzirkulation zu gewährleisten. Die Besteckhalter und der mittlere Deckel befinden sich im Zubehörbeutel. Der mittlere Deckel dient nur zur Abdeckung. Die Besteckhalter können voneinander gelöst und einzeln verwendet werden. Das Besteck muss gleichmäßig verteilt mit dem Griff nach unten im Besteckkorb angeordnet werden.
Anleitung für den Benutzer Der Korb kann je nach Modell über einige oder alle nachstehenden Zubehörelemente verfügen: Ablagen für Tassen oder lange Gegenstände (Schöpfkellen, Kochlöffel usw.) auf der linken Seite, die hochgeklappt werden können, wenn sie nicht gebraucht werden. Halter für langstielige Gläser (Glass Holder) auf der linken Seite. Zum Gebrauch muss man ihn lediglich anheben und mit den hierfür vorgesehenen Haken blockieren. Besteckgitter auf der rechten Seite für Messer und Teelöffel.
Anleitung für den Benutzer OBERKORB In den Oberkorb sollte lediglich kleines und mittelgroßes Geschirr wie beispielsweise Gläser, Unterteller, Kaffee- und Teetassen, flache Schüsseln und leichte, hitzebeständige Kunststoffgegenstände geladen werden. Wird der Oberkorb in der niedrigsten Position verwendet, kann er auch mit gering verschmutzten größeren Tellern beladen werden.
Anleitung für den Benutzer EINSTELLEN DES OBERKORBS Die Höhe des Oberkorbs kann verstellt werden, damit man im Unterkorb große Teller und großes Geschirr unterbringen kann. Der Verstellmechanismus entspricht je nach Geschirrspülermodell dem A oder B. Version A: In zwei Positionen ausziehbar. • Ziehen Sie beide Korbführungen heraus. • Lösen Sie die Feststellvorrichtungen, wie in der Abbildung gezeigt, und nehmen Sie sie heraus. • Ziehen Sie den Korb heraus.
Anleitung für den Benutzer 3. Reinigung und Pflege Vor der Ausführung von Wartungsarbeiten am Gerät, den Netzstecker aus der Steckdose ziehen oder seine Stromversorgung mit der allpoligen Trennvorrichtung unterbrechen. 3.1 Sicherheitshinweise und allgemeine Ratschläge Keinesfalls Reinigungsmittel verwenden, die Scheuermittel oder Säure enthalten.
Anleitung für den Benutzer REINIGUNG DER FILTERGRUPPE • • • • Der mittlere Filter C sollte regelmäßig kontrolliert und gegebenenfalls gereinigt werden. Zum Herausnehmen muss man die Zungen greifen, entgegen dem Uhrzeigersinn drehen und anheben. Von unten gegen den mittleren Filter D drücken, um ihn aus dem Mikrofilter zu lösen. Die beiden Teile, aus denen der Kunststofffilter besteht, voneinander trennen; hierzu an der von den Pfeilen angegebenen Stelle auf den Filterkörper drücken.
Anleitung für den Benutzer VOR DER ERNEUTEN VERWENDUNG DES GESCHIRRSPÜLERS NACH EINER LÄNGEREN NICHTVERWENDUNG: • • • Sicherstellen, dass sich in der Wasserleitung weder Schlamm noch Rost abgelagert haben; hierzu das Wasser aus dem Zufuhrhahn einige Minuten lang fließen lassen. Den Netzstecker wieder in die Steckdose stecken. Den Wasserzulaufschlauch wieder anschließen und der Wasserhahn wieder zu öffnen.
Anleitung für den Benutzer Wenn das Geschirr nicht richtig getrocknet wird oder matt bleibt, sicherstellen, dass: • • • sich Klarspüler im zugehörigen Behälter befindet; die Dosierung richtig eingestellt wurde; der verwendete Reiniger guter Qualität ist und nicht seine Wirksamkeit verloren hat (z.B. weil er nicht richtig aufbewahrt oder die Verpackung schon vor langer Zeit geöffnet wurde).
Anleitung für den Benutzer 4. Abhilfe bei Fehlfunktionen Der Geschirrspüler verfügt über ein Eigendiagnosesystem, dass eine Reihe von möglichen Fehlfunktionen erkennen und signalisieren kann. TABELLE DER VOM EIGENDIAGNOSESYSTEM ERKANNTEN FEHLFUNKTIONEN FEHLFUNKTION BESCHREIBUNG Er 01 Eingriff des Überlaufschutz-Systems (wenn vorhanden). Er 02 Eingriff des Systems, das den Wasserstand in dem Geschirrspüler begrenzt. Er 03 Die Maschine wärmt des Wasser nicht. Er 04 Temperatursonde nicht verbunden.
Anleitung für den Benutzer TECHNISCHE DATEN Breite Tiefe, gemessen ab der Außenkante des Bedienfelds Höhe (je nach Modell) Fassungsvermögen Zulaufwasserdruck Elektrische Daten 597 ÷ 599 mm Freistehende Geräte 600 mm Integrierbare Geräte 570 mm Freistehende: von 850 mm bis 890 mm von 890 mm bis 930 mm Integrierbare: von 820 mm bis 890 mm von 860 mm bis 930 mm 13 Maßgedecke min. 0,05 - max. 0,9 MPa (min. 0.5 – max.