Instruction manual

Problem Possible cause Solution
The Super function is
switched on.
Refer to "Super function"
section.
There is no cold air circula‐
tion in the appliance.
Make sure that there is cold
air circulation in the appli‐
ance. Refer to "Hints and
Tips" chapter.
Power indicator light flashes. An error has occurred in
measuring the temperature.
Contact a qualified electri‐
cian or the nearest Author‐
ized Service Centre.
If the advice does not lead to
the desired result, call the
nearest Authorized Service
Centre.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
NOISES
SSSRRR!
CLICK!
HISSS!
BRRR!
BLUBB!
31