Instruction manual

CONTROL PANEL
1 2 3 4 5
1
Power indicator light
2
Temperature regulator and On/Off
switch
3
Super light
4
Super switch and alarm reset switch
5
Alarm light
Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
If the temperature inside the appliance is
too high, the Alarm light will blink and the
acoustic alarm will turn on.
3. Push the Super switch and the
acoustic alarm will turn off. The Alarm
light will blink until the internal
temperature has reached a level
required for the safe conservation of
frozen food.
Switching off
1. Turn the Temperature regulator to the
"O" position.
The Power indicator light will switch off.
2. Remove the plug from the wall socket.
Temperature regulation
The temperature is regulated
automatically. However, you can set a
temperature inside the appliance yourself.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
To operate the appliance:
1. Turn the temperature regulator
clockwise to obtain a lower
temperature inside the appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
Super function
The Super is used to perform pre-freezing
and fast freezing in sequence of Freezer
compartment. This function accelerates
the freezing of fresh food and, at the same
time, protects foodstuffs already stored
from undesirable warming.
To freeze fresh food activate
the Super function at least 24
hours before placing the food
to complete pre-freezing.
To switch on the function:
1. Press the Super button for 2-3
seconds to activate the Super function.
The Super light will switch on.
2. Place the food in the freezing
compartment and keep the Super
function switched on for further 24
hours. Refer to "Freezing fresh food"
section.
24