Instruction manual

Use
65
EN
Temperature probe
Insert the probe into the food before starting
the blast chill by probe cycle or hot
functions.
• The temperature probe must be inserted
into the middle of the food without going
through it.
• For different sized pieces or irregular
foodstuffs, the probe should be placed in
the largest piece/thickest area.
When you have finished using the probe,
clean it with a soft cloth and warm water,
dry it carefully and return it to its housing.
3.4 Using the Blast Chiller
First use
When using the appliance for the first time,
or after a power failure, the
symbol will flash on the display. In order to
be able to start any cooking function, the
current time must be set (if the oven is being
turned on for the first time, it is also
recommended you set the required
language).
Sharp point
Injury hazard
• Handle the probe with care and do not
touch its tip.
Insert the probe transversely,
ensuring at least 3/4 of its length is
inside the foodstuff.
The appliance language is set to
“English” by default.
When first connecting or after the
power has been cut for a time it
will be necessary to wait a few
seconds before you can interact
with the appliance.