Instruction manual

Use
89
EN
4. Set the time at which you wish the
function to end and press the button
to confirm.
5. Press the button to start the function.
6. The appliance will enter conservation
mode at 3°C while it waits for the
function start time.
7. Once the function has started, the
following screen will appear. The screen
will remain active until the duration set by
the user has passed.
When setting the function end time,
take into account the duration of
the function itself.
If, for example, you set the function
at 22:00 with an end time of
23:30 for a function duration set to
2 hours, the appliance will start the
function with a delay of 24 hours,
and the appliance will show the
conservation at 3°C screen while
it waits for the set time to start up
the function.