User Manual

Use
83
EN
1. Press the symbol to select the
“proving” function from the main special
functions screen.
2. Set the required temperature and time
using the and buttons.
3. At this point it is only possible to confirm
step 1 with the button or button
in order to move on to setting the two
subsequent steps, setting the temperature
and time in the same manner.
4. When you have completed the settings,
press the button to confirm.
5. The following screen will be displayed;
press to start the function.
6. If a function end time has been set, the
following screen will be shown giving all
information. The appliance will change
to cooling mode while waiting for the
function to be started. In this condition it is
still possible to modify the function end
time by pressing the button.
When setting the function end time,
take into account the duration of
the function itself.
If, for example, you set the function
at 22:00 with an end time of 23:30
for a function duration set to 2
hours, the appliance will start the
function with a delay of 24 hours,
and the appliance will show the
conservation at 3°C screen while it
waits for the set time to start up the
function.