User Manual

Cleaning and maintenance
95
EN
3. Open the door and press the button.
The following screen will be displayed:
4. Once automatic cleaning is complete,
the following screen will be displayed:
5. Dry the interior of the appliance
thoroughly.
4.3 Extraordinary maintenance
What to do if...
The display is completely off:
• Check the mains power supply.
• Check whether an all-pole switch
upstream of the appliance supply line is
in the “ON” position.
The appliance does not cool:
• Check whether it has been set to “demo”
mode (for further details see “Demo
mode (for showrooms)”).
The controls do not respond:
• Check whether it has been set to
“controls lock” mode (for further details
see “Controls lock”).
Malfunction Alarms
Take note of the error, switch off the
appliance and call Technical Support.
If you accidentally close the door
during automatic cleaning, the
function will not stop and the
appliance will beep once a minute
while displaying the following
message:
If the problem has not been
resolved or in the case of other
types of fault, contact your local
technical support centre.
Blast chilling function
Conservation or Temperature
Maintenance function