User guide

18
4 / USING YOUR APPLIANCE
EN
PROGRAMMED COOKING
••
Set the desired cooking mode and adjust the
temperature if necessary
Example: Circulating heat position .
temperature 200°C then press the START
button (fig.1).
- Press the “cooking time” button.
The cooking time flashes 0:00 to indicate that
it is now possible to set it (fig.2).
- Press the + or - touch controls to set the
desired time.
Example: 25 minutes of cooking (fig.3).
The adjusted cooking time is automatically
recorded after a few seconds. It can also be
entered by pressing on the touch control
again. Then the time reappears in the display.
After these steps, the oven heats up. At the
end of cooking, a series of beeps is emitted
for a few minutes. You can stop the beeps by
pressing START/STOP for one second. You
can view or change the end of cooking by
pressing the touch control. To cancel your
programme, press the START/STOP touch
control.
•Immediate cooking with
programmed cooking time
START
START
STOP
STOP
fig.2
START
START
STOP
STOP
fig.1
START
START
STOP
STOP
fig.3