Technical data
Table Of Contents
- 1. INSTRUCTIONS FOR USE
- 2. SAFETY PRECAUTIONS
- 3. ENVIRONMENTAL RESPONSIBILITY
- 4. GET TO KNOW YOUR OVEN
- 5. AVAILABLE ACCESSORIES
- 6. FRONT PANEL
- 7. USING THE OVEN
- 7.2.1 Internal oven lights
- 7.2.2 Oven runners
- 7.2.3 Cooling system
- 7.6.1 Cooking with a preset temperature
- 7.6.2 Changing the preset temperature
- 7.7.1 Cooking timed with the timer
- 7.7.2 Semi-automatic cooking
- 7.7.3 Automatic cooking
- 7.7.4 Changing the preset temperature
- 1 P1: OFF / ON Activate or deactivate the child safety lock (); this function, after 2 minutes of operation without any actions by the user, locks all the functions and knobs; it is identified by the appearance of on DSP1. To temporarily deactivate l...
- 2 P2: OFF / ON Activate or deactivate the Show Room function; this function disables all the heating elements so that only the control panel works (to use the oven normally, set P2:OFF).
- 3 P3: OFF / ON Activate or deactivate the function that allows a maximum consumption of 2300 W.
- 7.8.1 Change the settings in the secondary menu
- 8. COOKING WITH THE OVEN
- 9. CLEANING AND MAINTENANCE
- 10. EXTRAORDINARY MAINTENANCE
- 11. INSTALLING THE APPLIANCE
Instructions for the user
61
7.7 Programmed cooking (pyrolytic models)
7.7.1 Cooking timed with the timer
From ON status (see “7.4 Operating modes (pyrolytic models)”), press PT1
once. The display will show (steadily) and (flashing). Turn PT1
to set the minutes of cooking (from 00:01 to 23:59:00). After a few seconds,
will stop flashing and stay on constantly; the countdown will start from that
moment. At this point it is also possible to select the desired cooking function
and wait for the buzzer to sound, indicating that the cooking time is over.
Press PT1 once to stop the buzzer. You can now set an additional cooking time
by turning PT1, or return to the display of the current time by pressing PT1
twice.
Tur n PT2 to the “0” symbol to switch off the oven.
The timer also works with no function set.
Warning.:The timer does not stop the cooking process. It only warns the user
that the preset number of minutes have passed.
To switch the oven off, turn PT2 to the “0” symbol.
Modifying the set data
Once the countdown has started it is possible to change its duration during
cooking.
When is steady, press PT1 once. starts flashing and PT1 can be
turned to change the set duration. A few seconds after the last change, will
stop flashing and the countdown will restart from the new value.
To change the preset temperature, wait for to become steady and turn PT1
to the right or left to increase or decrease the cooking temperature.