Technical data
Table Of Contents
- 1. INSTRUCTIONS FOR USE
- 2. SAFETY PRECAUTIONS
- 3. ENVIRONMENTAL RESPONSIBILITY
- 4. GET TO KNOW YOUR OVEN
- 5. AVAILABLE ACCESSORIES
- 6. FRONT PANEL
- 7. USING THE OVEN
- 7.2.1 Internal oven lights
- 7.2.2 Oven runners
- 7.2.3 Cooling system
- 7.6.1 Cooking with a preset temperature
- 7.6.2 Changing the preset temperature
- 7.7.1 Cooking timed with the timer
- 7.7.2 Semi-automatic cooking
- 7.7.3 Automatic cooking
- 7.7.4 Changing the preset temperature
- 1 P1: OFF / ON Activate or deactivate the child safety lock (); this function, after 2 minutes of operation without any actions by the user, locks all the functions and knobs; it is identified by the appearance of on DSP1. To temporarily deactivate l...
- 2 P2: OFF / ON Activate or deactivate the Show Room function; this function disables all the heating elements so that only the control panel works (to use the oven normally, set P2:OFF).
- 3 P3: OFF / ON Activate or deactivate the function that allows a maximum consumption of 2300 W.
- 7.8.1 Change the settings in the secondary menu
- 8. COOKING WITH THE OVEN
- 9. CLEANING AND MAINTENANCE
- 10. EXTRAORDINARY MAINTENANCE
- 11. INSTALLING THE APPLIANCE
Instructions for the user
62
7.7.2 Semi-automatic cooking
Semi-automatic cooking is the function which allows a cooking operation to be
started and then ended after a specific length of time set by the user.
Select a cooking function (see “7.6 Selecting functions (pyrolytic models)”) and
press PT1 twice. The display will show and (flashing).
Tur n PT1 to the right or left to set the minutes of cooking (from 00:01 to 23:59).
A few seconds after the desired duration is set, will stop flashing and semi-
automatic cooking will start from that moment. At the end, the word STOP will
appear on DSP1, cooking will stop and a buzzer will sound; press PT1 once to
deactivate it.
If you wish to continue cooking beyond the set time, press PT1 again. The oven
will restart normal operation with the cooking settings selected previously.
Turn PT2 to “0” to switch off the oven completely.
Modifying the set data
Once semi-automatic cooking has started, its duration can be changed.
When is steady, press PT1 once. starts flashing and PT1 can be
turned to change the set duration. A few seconds after the last change, will
stop flashing, and semi-automatic cooking will restart from the new value.
To change the preset temperature, wait for to become steady and turn PT1
to the right or left to increase or decrease the cooking temperature.