Technical data
Table Of Contents
- 1. INSTRUCTIONS FOR USE
- 2. SAFETY PRECAUTIONS
- 3. ENVIRONMENTAL RESPONSIBILITY
- 4. GET TO KNOW YOUR OVEN
- 5. AVAILABLE ACCESSORIES
- 6. FRONT PANEL
- 7. USING THE OVEN
- 7.2.1 Internal oven lights
- 7.2.2 Oven runners
- 7.2.3 Cooling system
- 7.6.1 Cooking with a preset temperature
- 7.6.2 Changing the preset temperature
- 7.7.1 Cooking timed with the timer
- 7.7.2 Semi-automatic cooking
- 7.7.3 Automatic cooking
- 7.7.4 Changing the preset temperature
- 1 P1: OFF / ON Activate or deactivate the child safety lock (); this function, after 2 minutes of operation without any actions by the user, locks all the functions and knobs; it is identified by the appearance of on DSP1. To temporarily deactivate l...
- 2 P2: OFF / ON Activate or deactivate the Show Room function; this function disables all the heating elements so that only the control panel works (to use the oven normally, set P2:OFF).
- 3 P3: OFF / ON Activate or deactivate the function that allows a maximum consumption of 2300 W.
- 7.8.1 Change the settings in the secondary menu
- 8. COOKING WITH THE OVEN
- 9. CLEANING AND MAINTENANCE
- 10. EXTRAORDINARY MAINTENANCE
- 11. INSTALLING THE APPLIANCE
Instructions for the user
65
7.8 Secondary menu (pyrolytic models)
The secondary menu appears on first use, after a power failure or by holding
PT1 down for 3 seconds with the oven set to OFF (see “7.4 Operating modes
(pyrolytic models)”).
The secondary menu enables the user to:
Set the time shown on the display (DSP1).
1
P1: OFF / ON Activate or deactivate the child safety lock ( ); this
function, after 2 minutes of operation without any actions by the user, locks
all the functions and knobs; it is identified by the appearance of on
DSP1. To temporarily deactivate locking and modify a cooking programme
or select a different function, keep PT1 pressed down until disappears
from DSP1. At this point you can make the desired changes, and 2 minutes
after the last setting, the lock will be reactivated. To permanently deactivate
the lock, you have to enter the secondary menu and deactivate it as
described in this paragraph.
2
P2: OFF / ON Activate or deactivate the Show Room function; this
function disables all the heating elements so that only the control panel
works (to use the oven normally, set P2:OFF).
3 P3: OFF / ON Activate or deactivate the function that allows a maximum
consumption of 2300 W.
When the child safety lock is activated (
P1:ON
), if a knob is moved , “bLOC” is
displayed on DSP1 for 2 seconds. An action on PT2 also activates the “bLOC”
alarm until the function originally selected is restored.