Table of Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. PRECAUTIONS FOR USE ................................................................... 32 DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY ........... 33 SAFETY PRECAUTIONS ..................................................................... 34 GET TO KNOW YOUR OVEN .............................................................. 35 BEFORE INSTALLATION.....................................................................
Precautions for Use 1. PRECAUTIONS FOR USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE OVEN'S LIFE CYCLE. WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE APPLIANCE. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED STAFF IN COMPLIANCE WITH THE RELEVANT REGULATIONS. THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE AND COMPLIES WITH THE EEC DIRECTIVES CURRENTLY IN FORCE.
Disposal instructions 2. DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY Our products are only packaged using non-pollutant, environment-friendly, recyclable materials. We urge you to cooperate by disposing of the packaging properly. Contact your local dealer or the competent local organisations for the addresses of collection, recycling and disposal facilities. Never leave all or part of the packaging lying around.
Safety Precautions 3. SAFETY PRECAUTIONS SEE INSTALLATION INSTRUCTIONS FOR SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND FOR VENTILATION FUNCTIONS. IN YOUR INTEREST AND TO ENSURE YOUR SAFETY, BY LAW ALL ELECTRIC APPLIANCES MUST ONLY BE INSTALLED AND SERVICED BY QUALIFIED STAFF, IN ACCORDANCE WITH THE RELEVANT REGULATIONS. OUR APPROVED INSTALLATION ENGINEERS GUARANTEE YOU A JOB WELL DONE. GAS OR ELECTRIC APPLIANCES MUST ALWAYS BE DISCONNECTED BY SUITABLY SKILLED PEOPLE.
Instructions for the User 4. GET TO KNOW YOUR OVEN CONTROL PANEL OVEN LIGHT HOT AIR FAN (ON SOME MODELS ONLY) SHELF AND TRAY RUNNERS 5. BEFORE INSTALLATION Never leave packaging residues unattended in the home. Separate waste packaging materials by type and consign them to the nearest separate disposal centre. The inside of the appliance should be cleaned to remove all manufacturing residues. For further information, see “"11. CLEANING AND MAINTENANCE"”.
Instructions for the User 6. DESCRIPTION OF FRONT PANEL CONTROLS All the cooker's control and monitoring devices are placed together on the front panel. The table below provides the key to the symbols used.
Instructions for the User THERMOSTAT KNOB The cooking temperature is selected by turning the knob clockwise to the value required, between 50° and 250°C. In the model with glass front panel, the maximum temperature is 260°C.
Instructions for the User THERMOSTAT LIGHT Illuminates to indicate that the oven is heating up. Goes out when the set temperature is reached; flashes at regular intervals to indicate that the temperature inside the oven is being kept constantly at the set level. HOB CONTROL KNOB Used to regulate heating of the hob by turning the knob clockwise to the required setting, between 2 and 12. DUAL HEATING HOB CONTROL KNOB Used to regulate heating of the hob in dual heating zones.
Instructions for the User 7. ELECTRONIC PROGRAMMER LIST OF FUNCTIONS MINUTE MINDER BUTTON COOKING DURATION BUTTON END OF COOKING BUTTON VALUE DECREASE BUTTON VALUE INCREASE BUTTON MANUAL MODE BUTTON 7.1 Setting the time When the oven is used for the first time, or after an interruption in the electricity supply, the display flashes at regular intervals, showing . Press to stop the display flashing.
Instructions for the User 7.2 Semiautomatic cooking This function only switches the oven off automatically at the end of the cooking time. Press the key and the display will light up showing the figures ; keep it pressed, and at the same time use the value modification keys or to set the cooking duration. A few seconds after the key is released, the count of the programmed cooking duration will start and the display will show the current time together with the symbols A and . 7.
Instructions for the User After the setting, to display the time left press the key. In minute minder mode, the system will not cut out operation of the oven at the end of the set time. 7.5 End of cooking At the end of the cooking time the oven will switch off automatically and simultaneously a buzzer will start to sound in on-off mode. After the buzzer is stopped, the display will return to showing the current time together with the symbol, indicating that the oven is again ready for use in manual mode.
Instructions for the User 8. USING THE OVEN Before using the oven, check that the display is showing the symbol (see point "7.1 Setting the time"). 8.1 Precautions and General Advice When the oven and grill are used for the first time, they should be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process, which might contaminate foods with unpleasant smells.
Instructions for the User 8.2 Cooling fan system (on some models only) The appliance is equipped with a cooling system which comes into operation a few minutes after the oven is switched on. The operation of the fans generates a normal air flow which comes out above (Fig 1) or below (Fig 2) the door depending on the model, and may continue for a short time even after the oven is switched off. 8.
Instructions for the User 9. ACCESSORIES AVAILABLE The oven is fitted with 4 runners for placing trays and shelves at different heights. Shelf: useful to support pans containing the food for cooking. Tray grid: for placing on top of a tray for cooking foods which may drip. Oven tray: useful for collecting fat from foods placed on the grid above. Pastry tray: useful for cooking cakes, pizza and confectionery. Roof liner: remove it to simplify cleaning inside the oven.
Instructions for the User 10. COOKING ADVICE The oven should always be preheated in fan mode to 30/40°C above the cooking temperature. This considerably shortens cooking times and reduces electricity consumption, as well as giving better results. The oven door must be closed during cooking operations. 10.1 Conventional cooking FUNCTION SELECTOR THERMOSTAT 50 ÷ 250 °C This conventional cooking method, with heat from above and below, is suitable for cooking food on just one shelf.
Instructions for the User 10.3 Delicate cooking FUNCTION SELECTOR THERMOSTAT 50 ÷ 250 °C This type of cooking, for which it is extremely important to preheat the oven in fan mode, is particularly suitable for finishing cooking of foods underneath, or for processes which require heat mainly from below. The tray should be placed on the bottom runner. 10.4 Grilling FUNCTION SELECTOR THERMOSTAT Used for quick browning of foods.
Instructions for the User Keep the door closed during grilling. Grilling with the door open may permanently damage the oven and reduce operating safety. 10.6 Thawing FUNCTION SELECTOR THERMOSTAT 0 The air movement provided by the hot air fan alone thaws foods more quickly. The air circulating inside the oven is at room temperature. Thawing at room temperature has the advantage that the food's flavour and appearance are retained intact.
Instructions for the User 10.7 Recommended cooking tables Cooking times, for meat in particular, vary depending on the food's thickness and quality and personal preference. All times are calculated with the oven preheated. CONVENTIONAL COOKING RUNNER POSITION FROM THE BOTTOM TEMPERATURE °C. TIME IN MINUTES 2-3 2-3 210 - 230 210 - 230 30 40 2 2 2 2 2 2 2 2 170 - 200 210 - 240 170 - 200 170 - 200 170 - 200 140 - 170 170 - 200 170 - 200 30 - 40 PER Kg. 30 - 40 PER Kg. 30 - 40 PER Kg.
Instructions for the User HOT AIR COOKING RUNNER POSITION FROM THE BOTTOM TEMPERATURE °C.
Instructions for the User 11. CLEANING AND MAINTENANCE Before carrying out any operations, disconnect the appliance from the electricity supply. Never use a jet of steam for cleaning the inside of the oven. 11.1 Cleaning stainless steel To keep stainless steel in good condition, it must be cleaned regularly, after each use of the oven, after allowing it to cool. 11.
Instructions for the User 11.4 Cleaning the oven To keep the oven in good condition, it must be cleaned regularly, after allowing it to cool down. Remove all removable parts. • • Clean the oven shelves with hot water and non-abrasive detergents, rinse and dry. For easier cleaning, the door can be removed (see point “12.2 Removing the door”) 11.5 Cleaning the oven with self-cleaning liners (on some models only) The oven is fitted with enamelled liners that are continuously self-cleaning.
Instructions for the User 11.5.3 Removing the self-cleaning liners Remove all accessories from the inside of the oven and proceed as follows: 1 Remove the side runners (fig.1); 2 Extract the side liners “F” and “G” (fig. 2); 3 Extract the back liner “A” after undoing the threaded ring-nut “C” (fig. 2); 4 Replace the liners in their original positions. 11.6 Cleaning the door glazing The glass in the door should always be kept thoroughly clean.
Instructions for the Installer 12. EXTRAORDINARY MAINTENANCE Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind are provided below. Before carrying out any operation involving access to live parts, disconnect the appliance from the electricity supply. 12.
Instructions for the Installer 12.2 Removing the door Lift the levers B and take hold of the two sides of the door with both hands close to the hinges A. Raise the door to an angle of about 45° and remove it. To reassemble, fit the hinges A into their grooves, then lower the door into place and engage the levers B. 12.3 Removing the gasket To allow thorough cleaning of the oven, the door gasket can be removed. Before removing the gasket, remove the oven door as described above.
Instructions for the Installer 13. INSTALLING THE APPLIANCE 13.1 Electrical connection The nameplate with the technical data, serial number and mark is in a visible position on the oven door frame. The nameplate must never be removed. The appliance must be connected to earth in compliance with electrical system safety regulations.
Instructions for the Installer 13.1.1 Ovens with hob controls On ovens with hob controls the power supply lead is not supplied. Use a H05RR-F or H05RN-F rubber cable and when positioning it ensure that it does not touch the metal parts of the appliance's external casing. To access the terminal board, remove the appliance's back cover by unscrewing the relative screws.
Instructions for the Installer 13.2 Positioning the oven The appliance is designed for building-in to cabinets made from any heatresistant material. Comply with the dimensions shown in figures 1, 2, and 3. When installing under worktops, comply with the dimensions shown in figure 1-3. When installing under worktops incorporating combined hobs, a gap of at least 110 mm must be left from any side wall, as shown in figure 1.
Instructions for the Installer Never use the door for leverage when inserting the oven in the cabinet. Never apply excessive pressure to the open door. 13.3 Hob-oven connection Once installed, the combined hob must be connected to the oven.
